480583

Strong SRT 6500 CI Manual

14
Zoom out
Zoom in
Previous page
1/27
Next page
PART 1 • English
13
English
5.2.3 Channel Search
Press OK on ‘Channel Search’ in the Setup Menu. The following window will appear.
Set the Satellite, Tune Method, Transponder, Frequency, Symbol Rate, FEC and Function.
n Use CH p/q to move up and down the list.
n Use Vol t/u to change the setting.
Satellite Name: choose from the list of satellites selected in “Antenna setup” menu.
Tune Method:
Main options are:
“Sat” – receiver will search channels according to stored list of transponders.
“Sat – NIT” - receiver will search channels according to stored list of
transponders and in addition use network information. This mode allows
you to find all channels, even from new appeared transponders.
“TP” – this method is to search channels from one transponder.
“TP – NIT” – receiver will search channels from one transponder and in
addition use network information. This mode recommended if you want
to search channels of particular broadcaster only.
Sub options are:
“Free” – receiver will search only Free To Air channels
“Free+Scr”
– receiver will search for all channels
Transponder:
select index from the stored list
Frequency:
value of transponder frequency in MHz
Symbol Rate: value of symbol rate in kSymbols Per Second
Polarity: Horizontal / Vertical / Right / Left
FEC: Auto, 1/2, 2/3, 3/4, 5/6, 7/8
Function: Append/Delete/Change
AGC Signal: Indicates received signal strength level
5.2.3.1 How to search for channels:
Highlight “Tune method” field and press OK. Receiver will start channel scan. Names of the found channels will be shown in the two
columns: for TV and Radio separately.
You can interrupt search process by pressing to
OK or EXIT button.
If you press OK button: search process will be interrupted and you can select one of the following options:
n Save – to save all found channels
n Unselect – to unselect some unwanted channels from the list. Use OK button to unselect channels and Vol t/u buttons to switch between
TV and Radio list. Once you finish – press EXIT button, select “Save” and press OK. Only selected channels will be stored in the memory
n Cancel – to cancel result of search. No channels will be stored in the memory
If you press EXIT button: search process will be interrupted and no channels stoRED in the memory.
5.2.3.2 How to add new transponder:
n set “Tune method” to “TP” or “TP+NIT”
n move focus to “Frequency” and enter value in MHz
n move focus to “Symbol rate” and enter value in kSPS
n move focus to “Polarity” and select value
n move focus to “FEC” and select value or set “Auto”
n move focus to “Function” select “Append” and press OK. Message “Saving data...” will be shown on screen. New transponder
will be added to the end of the list
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 6500 CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 6500 CI in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info