Mounting of the antenna on DiSEqC 1.2 positioner is complicated job. In order to get the best performance of the system it should be
installed by a professional.
In “Antenna Setup” menu set Positioner to “DiSEqC 1.2” and press
OK button to enter to “Antenna position” menu.
n Use CHp/q to move up and down in the list.
n Use Vol t/u to change the setting.
Satellite: select satellite position of which you would like to setup.
Transponder:
select reference transponder which should be used for
signal quality indication.
Move: when this item is highlighted press Volt/uto move dish in East/
West direction accordingly.
Save position: highlight this item and press OK to store current position of
the dish for selected satellite. The
¸ symbol shown near menu item once
position is stored.
Reference position:
highlight this item and press OK if you need to turn
dish to reference position (0 degree position).
Function: Set west limit / Set east limit – select it and press OK if you want to
store current position of the dish as west / east limit; Disable limit / Enable limit –
select and press OK to disable / enable limits; Recalculate – select and press OK
to recalculate positions of all satellites based on adjustment for current satellite; Nudge west / Nudge east – select and press OK for fine adjustment of
the dish position; Nudge tilt up / Nudge tilt down – use this command if your positioner support adjustment of elevation.
Antenna status: show you current status of the antenna (stopped, moving to East/West).
Signal Quality: show quality of signal for selected reference transponder. Adjust antenna position in order to get maximum level of the Signal Quality.
n Press EXIT to go back to the previous mode.
5.2.2.2 USALS positioner setup
Mounting of the antenna on USALS positioner is complicated job. In order to get the best performance of the system it should be
installed by a professional.
In “Antenna Setup” menu set Positioner to “USALS” and press OK button to enter to “Antenna position” menu.
n Use CHp/q to move up and down in the list.
n Use Vol t/u to change the setting.
Satellite: select satellite position of which you would like to setup.
Transponder:
select reference transponder which should be used for signal
quality indication.
My longitude:
set longitude of your location.
My latitude: set latitude of your location.
Move: highlight this item and press t button to turn dish to the position
corresponded to the selected satellite. Press
u button to stop dish.
Reference position: highlight this item and press OK if you need to turn dish
to reference position (0 degree position).
Signal Level and Quality:
show level and quality of signal for selected
reference transponder. Adjust longitude and latitude of your location in order
to get maximum values of the Signal Level and Quality indicators.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Strong SRT 6500 CI at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Strong SRT 6500 CI in the language / languages: English as an attachment in your email.
The manual is 2,37 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
