PART 3 • English
61
3.1.4 Connecting a serial cable for downloading software
(Please see inside cover Figure 7)
Connect the RS 232 connector on the back of your receiver to the Serial port of
your computer using a serial cable.
Instructions on how to download software can be found on our website
www.strongsat.com (support > downloads).
4.0 Starting up
Ensure that your terrestrial receiver is correctly connected to your television and DVB-T
antenna, and that your terrestrial signal is of good quality. (If you are not sure about this
then ask your local Strong dealer to check your installation or terrestrial signal).
4.1 Starting up for the First Time
Connect your DVB-T receiver as under point 3 described.
Enter the < System-Setup / Language setting /Menu language>. Press OK
button to confirm your selection. Press the Back button until you go back to
installation menu.
Follow the path < Installation / (PIN '0000') / Country Selection >. Select
country and press OK button. Once selection is confirm "Country Selected
Sucessfully" appears.
Follow the path < Installation / (PIN '0000')/ Channel Set-Up/Auto Scan > to
select the automatic scan search option for all available TV and Radio pro-
grammes. Press OK button to confirm your selection and wait. Press the Back
button until you go back to main menu.
Note:
It is important to select the correct country inside the menu before the scanning
process starts to avoid scanning problems.