424428

Strong srt 4356 pvr Manual

12
Zoom out
Zoom in
Previous page
1/74
Next page
Part 1 • English
www.strongsat.com 21
personal preferences. You can change the OSD settings by applying the following
steps:
(Please see inside cover Screen 12)
1. Select "OSD Settings" and press OK or the Right button.
z Color Scheme: Press OK or the Right button and set the colors of the OSD
menu to "Basic ", "Color 1" or "Color 2 ".
z Transparency: Press OK or the Right button and select how transparent
you want your OSD.
z Brightness: Press OK or the Right button and select how you want the OSD
to be.
z OSD Timeout: Press OK or the Right button and select how long you want
the information banner to be on the screen when starting up your receiver
or when changing channels.
2. Press EXIT until you go back to main menu.
z Time setting: The system uses GMT (Greenwich Mean Time) as a default. To
set the time, apply the following steps:
(Please see inside cover Screen 13)
1. Select "Time Settings'" and press OK or the Right button.
z Select Time Zone: Press OK or the Right button, and a list of the GMT plus
or minus the hours you need for your country is displayed. Using
UP/DOWN keys select the correct one, and the receiver will automatically
show the current time in your country.
To set the time manually:
z Select GMT usage: Press OK or the Right button and use the UP/DOWN
buttons to set the GMT usage to "off". Press OK to save your setting. The
time setting menu will now activate the bottom two fields of the menu.
z Select Set Local Time: Press OK or the Right button. Use your UP/DOWN
buttons or Numeric buttons [0-9] to set the local time. When set, press OK
to save the local time.
z Select Set Date: Press OK or the Right button and set the date the way you
have set the time.
2. Press the EXIT button until you go back to the Main Menu.
z Power on Channel: This function allows you to set the channel you want when
the receiver turns on. To set the power on channel, apply the following steps:
Part 1 • English
22 www.strongsat.com
(Please see inside cover Screen 14)
1. Select Power on Channel and press OK or the Right button.
z Last Viewed: The receiver will start-up with the channel that you viewed
before mining the receiver off.
z Define Channel: This function allows you to set the channel you want when
the receiver turns on. To define the channel, apply the following steps:
2. Press OK or the Right button and select in the TV or radio list of channels the
channel you want to have your receiver start-up with.
z System Upgrade: You can download the latest software available including
new technologies to your receiver. To upgrade your system, apply the following
steps:
(Please see inside cover Screen 15)
1. Select "System Upgrade" and press OK. The receiver will display the message:
"Please wait, checking. for new software", If there is a recent software version
available fur your receiver, it will automatically download it via the satellite signal,
If you already have the latest version nothing will happen.
2. Press the EXIT button until you go back to main menu.
Note:
Be sure that your receiver has a good quality satellite signal. Do not turn off
your receiver while you are downloading new software.
z System Information: The system information displays information about your
receiver such as model number, software and boot version. To check system
information, apply the following steps: (Please see inside cover Screen 16)
1. Select "System information" and press OK or the Right button.
z Factory Reset: Be careful when using this function, because it will erase all the
data and parameters you may have set earlier to your receiver. Once you have
made a Factory Reset you will have to re-install your preferences and re-scan
your channels. To reset your receiver to factory default, apply the following steps:
1. Select "Factory Reset" and press OK.
2. Enter your PIN Code. The receiver will reset itself to the original factory
settings.
Note:
Your PIN code will change back to the factory setting "1234".
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong srt 4356 pvr at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong srt 4356 pvr in the language / languages: English, German, Italian as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info