Manual Strong srt 4356 pvr (page 11 of 74) (English, German, Italian)

424428

Zoom out

Zoom in

1/74

Part 1 • English

www.strongsat.com 19

z Channel: You can select the channel to be recorded when the Timer mode is

PVR record, Time Interval or power on, or the channel displayed when the

power is ON.

3. Press the Red button to save and proceed with another timer event

4. Press the Blue button to save and exit the timer menu

5. Press the Green button to exit the timer menu WITHOUT saving the settings

Tip: You have to select the channel, starting time, and ending time settings if the Timer

mode is "Time interval" or "PVR Recording". An error message will appear if any of the

settings are incorrect. Especially in PVR Record, be sure to check the hard disk

capacity, starting time and ending time.

5.1.4 The Installation Menu. (Please see inside cover Screen 9)

All settings that are related to TV, Dish, LNB and Satellites are within this menu. The

installation menu contains several sub menus such as "System Set-up ", "LNB Set-up

", "Channel Set-up" and "Parental Lock". To access the different sub menus, apply the

following:

5.1.4.1 System Set-up Menu (Please see inside cover Screen 10)

To install your receiver to your personal preferences, go to "System Set-up" menu.

Then please apply the following steps:

1. Press the Menu button.

2. Using UP/DOWN keys, select "Installation" and press OK.

3. Using UP/DOWN keys, select "System Set-up" and press OK.

z Language Settings: You can change the language of the menu, audio and

subtitles by applying the following steps:

1. Select "Language Settings" and Press OK or the Right button.

2. Select "Menu Language' and Press OK or the Right button.

3. Using UP/DOWN keys, select the language in which you want your menu to be

displayed and press OK. The screen of the menu will change to the language of

your choice.

4. You can also choose your preferred first audio language, second audio

language and the subtitle language by applying the same steps.

Part 1 • English

20 www.strongsat.com

5. Press EXIT until you return to the main menu.

z TV/VCR Settings: You can set the TV/VCR settings to your personal

preferences. Check your TV and VCR user manuals for the correct settings.

You can change your TV/VCR settings by applying the following steps:

(Please

see inside cover Screen 11)

1. Select "TV/VCR Settings" and press OK or the Right button.

z TV Mode: Press OK or the Right button and set your TV mode to "Multi",

"PA L " or "NTSC ".

z Video Mode: Press OK or the Right button and set your VCR mode to

"CVBS" (Composite video) or "RGB" (preferred option if your TV set is

compatible with it).

z Screen Mode: Press OK or the Right button and set your screen mode to

"Full Screen" or "Letterbox".

z Audio Mode: Press OK or the Right button and set your audio output to

"Stereo ", "Left only" or "Right only" (left or Right is for mono TV sets)

z SPDIF Output: Press OK or the Right button and activate your S/PDIF

output on the back of your receiver, so you can connect it to a digital Audio

amplifier using an optic fiber cable.

z VCR Scart: Press OK or the Right button and set the scart output to "Auto"

or "STB" (Set Top Box). If set to "STB ', the VCR scart signal is not

automatically looped through.

z UHF Mode: Press OK or the Right button and set the UHF mode to "PAL

B/G", "PAL l" or "PAL D/K". If the TV set is connected using a coaxial (RF)

cable, you must select RF modulator type here. The RF modulator type

affects the channel audio.

z UHF Channel: Press OK or the Right button and set the UHF channel

number to the same UHF channel number of your TV set. This only has to

be done if your TV set is connected with a coaxial (RF) Cable. If the UHF

Channel numbers of the receiver and the TV set are not set the same, no

picture will be displayed.

2. Press EXIT until you go back to main menu.

z OSD Settings: You can set the OSD (On Screen Display) on your TV to your

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Strong srt 4356 pvr in the language / languages: English, German, Italian as an attachment in your email.

The manual is 0,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Strong srt 4356 pvr Manual

Product: