424398
26
Zoom out
Zoom in
Previous page
1/35
Next page
26
6.8.1. GOTO ANGLE
Turns the motor to the entered Angle. Enter the angle with
digits and use BLUE button to change direction. Press Ok
to let it turn. Some Diseqc 1.2 positioners do not support
go to angle command. If your positioner does not support
this function you can enter 000 for the angle in order to turn
the positioner to the reference zero position
6.8.2. DRIVE MOTOR
Drives the motor East or West and rotates the antenna on
the polar axis. East or West will continuously blink on the
screen to indicate the direction the motor is moving. To
drive the motor toward a specific direction,
“ ’’
or
“ ’’
button should be kept pressed.
6.8.3. MOTOR SPEED
Adjusts the speed of the motor. There are two modes,
Fast and Slow. Fast mode is useful for driving the motor
over large angles or coarse adjustment. Slow mode
comes handy when fine-tuning is needed.
6.8.4. SET EAST LIMIT
Stores the current location of the positioner as the east
limit.
6.8.5. SET WEST LIMIT
Stores the current location of the positioner as the west
limit.
6.8.6. ENABLE / DISABLE LIMITS
Enabling the (software) limits will cause the motor not to
drive after east or west limit is reached. When the software
limits are disabled, the positioner motor will drive over the
full (mechanically-defined) arc of its movement.
6.8.7. STORE SATELLITE POSITION
When the desired signal quality is reached, the user can
store the current location of the positioner. This functionality
enables the Positioner Motor Unit to drive back at any later
time to the antenna shaft position stored by the user.
6.8.8. POSITIONER RESET
Restores build in Satellite Table for the positioner Motor
Unit.
6.8.9. RECALCULATE SATELITE
POSITIONS
The positioner motor unit recalculates satellite positions of
the other satellites.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong srt 4120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong srt 4120 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong srt 4120

Strong srt 4120 User Manual - German - 35 pages

Strong srt 4120 User Manual - Spanish - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info