424398
25
Zoom out
Zoom in
Previous page
1/35
Next page
25
6.8. DISEQC 1.2 SETUP MENU
DiSEqC 1.2 Setup Menu is located under Antenna
Installation Menu. User selects the name of the satellite
and its properties like polarisation and frequency band at
the Antenna Installation Menu before entering DiSEqC 1.2
Setup Menu.
Setting Polarisation and 22 kHz parameters from
Antenna Installation Menu is optional. By default,
polarisation is set to H/V (both horizontal and vertical
frequencies) and 22 kHz is set to Auto (both 22 kHz Off
and 22 kHz On). These parameters can be left in their
default positions to simplify the installation task. The aim
is to drive the motor on the polar axis and watch the signal
quality indicator. When the receiver is tuned to a satellite,
the signal quality bar will rise. If the user is satisfied with
the signal quality he stores the current position of the
antenna. Otherwise he will try to fine-tune it until the desired
level is reached.
There are a certain number of satellites, which have
predefined presets stored in the box. Satellites having
predefined presets appear with their original names like
Astra, Hotbird, etc. If a satellite has predefined presets, the
user does not have to enter a reference transponder from
that specific satellite although It is possible to enter a
reference transponder for all satellites. Figure shows the
upper part of the DiSEqC 1.2 Setup Menu
Satellites that do not have predefined presets appear with
names like User 1, User 2, etc. Here, frequency, symbol
rate and polarisation of a reference transponder should be
entered in order to be tuned into the satellite.
The two essential parameters, frequency and polarisation
of a reference transponder should be entered according to
the antenna settings (See Figure 6.8.3). If the polarisation
setting is vertical in Antenna Installation Menu, it will be
vertical in DiSEqC 1.2 Setup Menu automatically and the
user will not be able to change it. Same situation is valid
when the polarisation is horizontal.
Polarisation should be set to H/V from Antenna
Installation Menu in order to be able to changed by the user
from DiSEqC 1.2 Setup Menu. Frequency values should
also be entered according to the 22KHz mode. In 22 kHz
Off mode (Low Band), the frequency range is between
10700 and 11900. It is between 11550 and 12750 for 22
kHz On (High Band). If 22 kHz mode is set to Auto, the
user can enter a value in the whole range that is between
10700 and 12750. Any frequency value out of the specified
range will cause a warning message to appear on the
screen.
The following part gives a detailed explanation about the
DiSEqC 1.2 motor functions.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong srt 4120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong srt 4120 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Strong srt 4120

Strong srt 4120 User Manual - German - 35 pages

Strong srt 4120 User Manual - Spanish - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info