751416
14
Zoom out
Zoom in
Previous page
1/32
Next page
3.6 Aerial or Cable installation
For Aerial and Cable antenna type following settings are available:
Channel Order Selection of LCN will order channels according to numbering provided by the
TV network operator. Select Service ID if you wish channels to be ordered in
Frequency descending order.
Scan Mode Select DTV to install only Digital TV and Radio channels or select AT V to install
only Analogue TV channels.
Select Search once you have completed the settings. Depending on the choice you have done TV set will
display dierent next steps of installation.
3.6.1 Aerial installation
If you have selected Aerial installation then Auto search process will start directly once you have pressed
OK on Search.
NOTE: If you have an active antenna, please check the user manual of the antenna
for external power supply. The TV cannot supply power used for an active
antenna.
3.6.2 Cable installation
If you have selected Cable installation then you will be guided to Auto Tune sub-menu.
You can select scan type parameter as Quick Scan or Full Scan.
Quick Scan selected by default and advised for quick normal search for provided channels.
You can do scan with all automatically detected settings or additionally specify required settings
according to information from your cable TV provider.
Frequency Press BLUE button and enter (using 0 ~ 9) the main frequency used by your
provider in MHz.
Modulation Press RED button to dene modulation. Available options are: 16 QAM, 32
QAM, 64 QAM, 128 QAM and 256 QAM.
Symbol Press GREEN button and enter (using 0 ~ 9) the used Symbol rate in Ks/s from
your provider.
Network ID Press YELLOW button and enter (using 0 ~ 9) the used Network ID from your
provider.
NOTE: Please get and check information for settings for your cable system from
your cable TV provider.
NOTE: Option Full Scan will scan all frequencies and could take approximately 20
minutes depending on your cable network.
Select Start Scan and press OK to continue.
10
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 24HA3303U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 24HA3303U in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info