751416
12
Zoom out
Zoom in
Previous page
1/32
Next page
If you have connected the TV set to your home router using an Ethernet cable, then the Network setting
screen appears conrming the connection. Press OK to continue the installation.
If you did not connect the TV set with an Ethernet cable, then the Choose Wi-Fi screen will appear. Select
the network from the list or select Skip and press OK.
On the next screen, enter the password for the selected network by using the virtual keyboard. Once
the password entered, select Done on the virtual onscreen keyboard and press OK. The next screen will
conrm the connection to the Internet. You can proceed to the next step of the installation of re-pick
Wi-Fi to select another network.
If you proceed to next step, the Setting completed screen will appear.
3.3 FTI without DTV installation
If you do not want to scan channels and make DTV installation during FTI, select Go to Home screen to
nish installation and press OK to conrm your choice.
If you have selected Go to Home screen the Android Home Menu screen of TV will appear.
Please refer to chapter 4 to read more about how to use Android platform.
3.4 DTV FTI installation
If you want to scan channels and make DTV installation during FTI, select Continue to DTV installation and
press OK to conrm your choice.
On the next screen appears Please select location.
Use tu to select your country from the list.
Once the country is selected, press q to select Next and press OK.
On the appeared screen Select Antenna Type, make your choice of:
Antenna Type Select Aerial if you wish to install Aerial channels. If you wish to install
channels from connected Cable network, then select Cable. If you have
connected your TV set to a Satellite dish, then select Satellite.
3.5 Satellite installation
If you have selected Satellite antenna type then you have to setup LNB according to your antenna
system.
If you are using single LNB and it is Universal type 9750/10600, then you can skip LNB Setting and go
directly to Search item to start scanning.
Otherwise, select LNB Setting and press OK.
LNB Setting
In this menu setup all settings according to physical parameters of your antenna system.
Satellite Highlight it and press OK to display list of available satellites, use pq to
select and OK to conrm.
Transponder Second item represents transponder of selected satellite. Highlight it and
press OK to display list of available transponders, use pq to select and OK to
conrm.
LNB Power Use tu to select value corresponded to LNB for selected satellite.
Long Cable Compensation Select between ON and OFF. Set to ON if you have high losses in the cable
due to its long length. It may help to get signal.
8
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strong SRT 24HA3303U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strong SRT 24HA3303U in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info