780318
25
Zoom out
Zoom in
Previous page
1/44
Next page
The battery is charged during brake mode, so the
dark bar points from left to right.
A small part of the battery energy is saved in order
to sustain the basic functions of your Stromer and
keep you safe. The lighting and display still work
for approximately another hour when the battery
is empty and the motor support has stopped.
SERVICE / MAINTENANCE
Regularly have your S-Pedelec inspected by
a Stromer dealer. These experts can identify dam-
aged and worn parts and are able to advise you in
selecting replacements. They will also check the
current software status and ensure that important
updates that improve safety and riding comfort
have been installed.
Refrain from repairing key parts yourself (frame,
forks, handlebars, stem, headset, brakes, lights).
Your S-Pedelec can only function safely and
effectively if you replace parts with suitable, au-
thorized replacements. Please consult your man-
ufacturer, importer or Stromer dealer for advice on
suitable replacement parts.
Only replace broken or worn parts with origi-
nal replacement parts from the manufacturer or
parts approved by your manufacturer. This is pre-
scribed for some components and an appropriate
list is provided in the “Exchange of components of
the fast Pedelec” section.
In this case, using non-original or non-approved
parts also invalidates the registration of the
S-Pedelec. The use of other non-approved parts
generally invalidates the warranty and guaran-
tees with the manufacturer for other parts.
If you install non-original or the incorrect
replacement parts, this can lead to a severe loss of
function! Tires with bad grip or tires that were not
designed for use in S-Pedelecs, brake pads with
inappropriate friction coefficient and wrongly used
or badly designed light-weight components can
cause accidents with the most severe of conse-
quences. The same applies for improper assembly!
Screws and torque spanners
When working on the S-Pedelec, please en-
sure that all screws are tightened to the correct
torque. The required torque is printed on many
parts with a screwed connection. This amount is
stated in Newton meters (Nm) and this work
should be carried out using a torque wrench. Best
suited are torque wrenches that slip and provide
an acoustic signal when the predefined fastening
torque is reached. Otherwise, screws may snap or
break. If you don’t own a torque wrench then you
should always leave this work to a Stromer dealer!
A table with the most important fastening torques
for screw connections is provided in the “Screw
connections” section.
Torque spanners
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stromer ST2 - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stromer ST2 - 2020 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stromer ST2 - 2020

Stromer ST2 - 2020 User Manual - German - 46 pages

Stromer ST2 - 2020 User Manual - Dutch - 45 pages

Stromer ST2 - 2020 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info