780318
24
Zoom out
Zoom in
Previous page
1/44
Next page
24 25
Changing the battery externally, outside
the S-Pedelec
CR245 charger
1. Connect the charger to the power mains. The
integrated LEDs light up in red and green.
2. Now connect the Stromer charger to the bat-
tery. The LEDs in the charger light up in or-
ange and green during the charging process.
If the LEDs flash red, the charging tempera-
ture is above the authorized range. When the
battery is fully charged, the LEDs light up
green.
3. Separate the battery from the charger and
then the charger from the mains connector.
Charger CR246
1. Connect the charger to the power mains.
2. Now connect the Stromer charger to the bat-
tery. The LED in the charger flashes green dur-
ing the charging process. If the LED flashes
red, the charging temperature is above the
authorized range. If the LED lights up in red,
there was an error during the charging pro-
cess. When the battery is fully charged, the
LED lights up green.
3. Separate the battery from the charger and
then the charger from the mains connector.
Charging the battery internally, in the
S-Pedelec
The connection for the charging cable is located
on the left side of the down tube, slightly below
the connection to the head tube.
Charger CR245
1. Connect the charger to the power mains. The
integrated LEDs light up in red and green.
2. Open the cover of the charging socket Con-
nect the Stromer charger to the Stromer. The
LEDs in the charger light up in orange and
green during the charging process. If the LEDs
flash red, the charging temperature is above
the authorized range. When the battery is
fully charged, the LEDs light up green.
3. Separate the battery/Stromer from the charger
and then the charger from the mains connector.
Charger CR246
1. Connect the charger to the power mains.
2. Open the cover of the charging socket. Connect
the Stromer charger to the Stromer. The LED in
the charger flashes green during the charging
process. If the LED flashes red, the charging
temperature is above the authorized range. If
the LED lights up in red, there was an error dur-
ing the charging process. When the battery is
fully charged, the LED lights up green.
3. Separate the battery/Stromer from the charger
and then the charger from the mains connector.
Charging duration
The charging time may vary according to the ver-
sion and the model of the battery and the charger.
Accurate charging times are provided in the infor-
mation at www.stromerbike.com/service.
Charging status indicator
The driving display provides the option of track-
ing the battery charge status of your Stromer. The
battery charge status is shown in the form of a bar
and a percent value. The Stromer automatically
switches off the motor and changes to bicycle
mode (no support) when the battery is empty.
The bar above the battery charge status indicates
the current energy flow. The display helps to ride in
an energy-saving way with a large driving range.
The longer the bar, the higher the energy flow.
The bar points from right to left as soon as the mo-
tor provides support.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stromer ST2 - 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stromer ST2 - 2020 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stromer ST2 - 2020

Stromer ST2 - 2020 User Manual - German - 46 pages

Stromer ST2 - 2020 User Manual - Dutch - 45 pages

Stromer ST2 - 2020 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info