790823
25
Zoom out
Zoom in
Previous page
1/44
Next page
25
WATER CONNECTIONS
Electric Boilers
The connections for ow and return must be carried out according to the colour scheme and labelling
marked on the boiler.
The connections for mains water inlet and outlet must be carried out according to the colour scheme and
labelling marked on the boiler.
When tightening or loosening threaded connections, always use suitable tools such as open-end adjustable
spanners. Do not use pipe wrenches, extensions or unsuitable tools that may cause damage or water leaks.
High temperature exible hoses are recommended for all connections, however if you are using irons
please ensure that you secure both connections and do not apply more torque than necessary as you may
split in the internal pipework of the boiler or weaken it, both will render the warranty void and increases the
chances of a leak that would not be covered by the warranty.
MAKING CONNECTIONS:
HEATING FLOW & RETURN:
These connections are ¾” for connection to 22mm pipe. Suitable diameter service valves should be installed at
the ow and return to allow the boiler to be isolated for maintenance without draining the entire heating system.
We recommend exi-hoses as overtightening irons may damage the boiler internals which is not covered under
warranty.
HOT WATER INLET & OUTLET: (COMBINATION BOILERS ONLY)
These connections are 1/2” for connection to 15mm pipe with service valve on the inlet for ow restriction. We
recommend exi-hoses as overtightening irons may damage the boiler internals which is not covered under
warranty.
PRESSURE RELIEF VALVE:
The boiler comes with a barb tting for quick connection in temporary applications, however we recommend
the removal of this to expose a 1/2” female connection, this can then be converted to 15mm copper pipe and
discharged according to current building regulations.
25


Need help? Post your question in this forum.

Forumrules
1

Forum

strom-e-boiler

Reset search

  • After turning off heater, I cannot turn it back on. The Menu button does not work. Submitted on 5-4-2023 at 16:40

    Reply Report abuse
  • the front panel is flashing E5 and I can not change anything Submitted on 13-12-2022 at 13:27

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Strom E-Boiler at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Strom E-Boiler in the language / languages: English as an attachment in your email.

The manual is 3.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info