813428
34
Zoom out
Zoom in
Previous page
1/44
Next page
34
6.3 Use an M6 hexagon key to loosen the 4 x M6 screws.
M6 screws
x 4
6
6.4 The hinge plate assembly is slotted so it can be moved up,
down and sideways by approximately 3mm to adjust the
position of the door in relation to the appliance.
6.5 Once the desired position has been achieved ensure the
screws are firmly tightened against the hinge plate assembly
to maintain the position.
7. Adjusting the Door Catch
To adjust the door catch:
7.1 Open the door to gain access to the catch.
7.2 Use a 13mm A/F spanner to loosen the half lock nuts either
side of the appliance body. This will allow the dome catch to
rotate in and out, see Diagram 5 below.
Dome catch
Washer
Appliance body
Half lock nuts
7
7.3 Once the desired setting has been achieved ensure the lock
nuts are tightened against the appliance body.
Maintenance & Servicing
8. Removing the Glass Plinth
8.1 Open the door as wide as possible.
8.2 Lift the plinth upward to clear the 2 x side fixing screws,
see Diagram 9.
Lift plinth clear of 2 x screws
9
8.3 If the plinth is too loose it can be adjusted via the 2 x side
screws and half lock nuts behind it. The plinth is designed to
sit tight but still be removable.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax View 7 Inset High Output Boiler Inset at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax View 7 Inset High Output Boiler Inset in the language / languages: English as an attachment in your email.

The manual is 4.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info