813428
33
Zoom out
Zoom in
Previous page
1/44
Next page
33
Maintenance & Servicing
4.10 Carefully wrap glass sealing rope (A) round the sides and
bottom edge of the glass, see Diagram 4.
Glass rope seal
A
4
4.11 Fix glass sealing rope (C) to the matt black side of the top
face, see Diagram 3.
4.12 Place the glass into position in the door.
4.13 Place the glass clamp into position and re-fix with the clean
fixing screws, tightening the screws evenly until glass is held
securely.
Do not over tighten the screws as this could break the
glass.
4.14 Fit only original Stovax ceramic glass, which is suitable to
use in high temperature applications.
4.15 Using the appliance with damaged door glass could cause
dangerous fumes to enter the room or the appliance to over-
fire resulting in damage.
5. Fitting a new Door Seal
To maintain the safe use of the appliance damaged or worn
door sealing rope must be replaced.
To do this:
5.1 Open the door.
5.2 Remove the steel top and glass top, if fitted,
(see Installation Instructions, Section 2).
5.3 Lift the door free of hinge blocks.
5.4 Lay the door face down on a soft, flat surface to protect the
paintwork, glass and controls.
5.5 Remove old rope and scrape old glue from locating groove.
Joint
Door rope seal E
Door rope seal D
5
Seal Length (mm)
Door rope seal D 1700
Door rope seal E 175
5.6 Clean the locating groove with a clean, dry cloth to remove
all old dust and debris.
5.7 Squeeze a generous bead of fresh Stovax Thermic Seal
glue into the rope locating groove.
5.8 Press the new Stovax rope into the locating groove, placing
the joint in the middle of the lower edge of the door.
5.9 Refit door and close to apply pressure to new rope.
5.10 Leave the door(s) closed for at least 12 hours before
lighting the appliance and run at a low temperature for
approximately one day. This allows the adhesive to fully
bond to the seal.
5.11 Using the appliance with a damaged door seal can cause
dangerous fumes to enter the room, or the appliance to over
fire resulting in damage.
6. Adjusting the Door Hinges
6.1 To maintain the safe use of your appliance, you may need to
adjust the door hinges to ensure the door closes safely and
correctly.
6.2 To complete this operation:
Open the door.
Remove the steel top and glass top, if fitted,
(see Installation Instructions, Section 2).
— Lift the door free of hinge blocks.
Lay the door face down on a soft, flat surface to protect
the paintwork, glass and controls.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax View 7 Inset High Output Boiler Inset at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax View 7 Inset High Output Boiler Inset in the language / languages: English as an attachment in your email.

The manual is 4.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info