813428

Stovax View 7 Inset High Output Boiler Inset Manual

11
Zoom out
Zoom in
Previous page
1/44
Next page
11
User Instructions
6.5 Fit the plug supplied into the hole where the riddling
mechanism is normally located and secure with bolt and
clamp (also supplied), see Diagram 16.
Plug
Clamp
Bolt
16
6.6 Replace the log guard and the ashpan.
7. Extended Burning
7.1 It is possible to get the appliance to burn for extended
periods of time. In order to do this:
—De-ashpriortonalrefuelling.
— Burn new fuel at a high temperature for a few minutes
before adjusting the Primary Air Control.
— Set air controls to low combustion settings.
This will gradually blacken the glass but it will clear when
operated at a high temperature for a short period.
8. Ash Removal
Do not allow ash to build up as it may cause damage
and adversely effect the performance of the appliance.
Warning: Ash can remain hot long after appliance has
been in use.
8.1 Burning Wood with a Woodburning tray.
— Open the Door.
— Leave a layer of ash to start the new fire on. Wood burns
best on a bed of ash (approx. 25mm (1") deep).
— Remove excess ash from the Woodburning tray with a
small shovel and place into a Stovax Ash Caddy (Stovax
Part No. 4227) or other suitable container.
— Rake the remaining ash evenly over the firebed.
Warning: Ash can remain hot long after appliance has
been in use.
— Using gloves, carefully remove ashpan using tool
supplied, see Diagram 16. Ensure the tool is fully
engaged before operation. Practise this technique before
hand with a cold ashpan.
— Place the ash into a Stovax Ash Caddy (Stovax Part No.
4227) or other suitable container.
Do not place hot ash in any container made from plastic
or any other combustible material.
— De-ash at least once a week.
8.2 All fuels (when fitted with a Multi-fuel grate):
Burning Solid Fuels:
— De-ash the appliance before filling with new fuel. Do not
allow ash to build up on the underside of the grate as
this can cause premature failure.
Burning Wood:
— Leave a layer of ash on top of the riddling bars to start
the new fire on. Wood burns best on a bed of ash
(approx. 25mm (1") deep).
All Fuels:
— Insert the Riddling Tool into the socket, see Diagram 17.
17
— Rotate the Riddling Tool backward and forward 3 or 4
times to remove the ash. Do not force the handle beyond
its natural stop point. The ash will fall into the ashpan.
8.3 Open the door.
Warning: Ash can remain hot long after appliance has
been in use.
Using gloves, carefully remove ashpan using tool supplied,
see Diagram 18. Ensure the tool is fully engaged before
operation. Practise this technique before hand with a cold
ashpan.
18
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax View 7 Inset High Output Boiler Inset at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax View 7 Inset High Output Boiler Inset in the language / languages: English as an attachment in your email.

The manual is 4.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info