813434
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
14
PR9057
4 x Inner flue collar bolts
5.3 Once the 4 x bolts have been successfully located in the
holes tighten the 3 x bolts securing the outer collar in place
to create a good seal. Do not over tighten the bolts.
5.4 Remove the 4 x bolts and put them to one side until
needed.
NOTE: The flue liner must be supported in accordance
with the manufacturers instructions, there should be no
weight on the Outer Box.
5.5 Inserting the inner box:
This will require 2 people.
Slide the inner box into the outer box (see Diagram 2)
using the side runners on the outer box as guides (see
Diagram 15).
15
PR9317
Fixing
holes
Side
runners
INSTALLATION INSTRUCTIONS
6. TOP FLUE INSTALLATION
6.1 Apply fire cement in to the faces shown prior to fitting
the inner collar (see Diagram 16).
16
PR8299
Fire
Cement
6.2 Fit the inner flue collar (the reverse of 1.4). Note the top
hat spacers on the front bolts.
6.3 Replace the internal components and door.
6.4 To fit the pipe to the collar:
If not already fixed to the hearth, move appliance into
position, taking care not to damage the hearth finish and fix
as per appliance installation manual (PM274).
6.5 Connect appliance to chimney using flue pipe and
reference Bench installation manual (PM205).
6.6 Seal the connecting joints.
17
PR9318
The flue must be installed in accordance with the
manufacturers instructions.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax Riva Studio Bench Glass and Steel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax Riva Studio Bench Glass and Steel in the language / languages: English as an attachment in your email.

The manual is 1.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info