813434
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
1. INSTALLING THE APPLIANCE
Each installation is unique to the property so it is not possible
to give details to suit every setting. The installation must comply
with Building Regulations and be made using "best practice"
construction methods.
Many fireplace openings have a supporting lintel. Do not remove
without supporting the remaining structure of the building. Do not
support the structure with the appliance or the flue system.
1. INSTALLING THE BENCH
Take care not to scratch the hearth or bench when fixing an
appliance to it. Where possible use soft protection underneath.
When repositioning is required, lift the appliance - Do not slide to
avoid marking.
For more detailed advice on the installation of the bench refer to
the Stovax Bench installation manual PM205.
1.1 Position bench on your hearth and mark out the 2 key slots
on the floor.
PR7582
1
1.2 Remove bench and drill the two marked positions with
Ø8mm hole to 50mm deep.
Ø8mm
PR7583
2
1.3 Tap in No.8 Rawl plugs.
INSTALLATION INSTRUCTIONS
No8 rawl plug
Ø8mm hole
PR7584
3
1.4 Screw in No.8 coach bolt leaving 5mm gap from the surface
of the floor.
No8 coach bolt
5mm Gap
PR7585
4
1.5 Slide the bench over the coach bolts in the hearth and
tighten to secure in place.
2. ASSEMBLING THE OUTER BOX
In order to secure the appliance to the bench, the Riva
Studio Bench kit has an extra outer box supplied. This comes
as a flat pack and must be assembled and the pieces secured
by the M6 bolts on the inside of the box, see Diagram 5.
PR9313
5
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stovax Riva Studio Bench Glass and Steel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stovax Riva Studio Bench Glass and Steel in the language / languages: English as an attachment in your email.

The manual is 1.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info