597133

Storage Options Homeguard DIY Kit Manual

22
Zoom out
Zoom in
Previous page
1/44
Next page
Homeguard DIY Kit Instruction Manual
22
3.4 Accessing your DVR remotely using a computer or a mobile
This DVR can easily and securely be accessed remotely from any computer connected to the internet, or a
compatible mobile phone. To achieve this, it is necessary to connect the DVR to your home network, and ensure it is
correctly setup.
3.4.1 Network and P2P settings
To ensure the system is setup properly, you need to find your router’s local IP address, and apply it to the DVR. You
then need to test the connection to the cloud based P2P service. The details required should already be present by
default, however may not match in some cases, so it is necessary to check them first. This should only take a few
minutes.
3.4.1.1 Find your router’s local IP address
The quickest way to do this is to run a program called IP Config on your computer. This is built in to Microsoft
Windows as standard.
The method used to run IP Config differs according to your operating system:
Windows XP
Click “Start”, then “Run...” to display the “Run” dialog
box.
In the “Run” dialog box type cmd and click OK.
A command prompt will open. Type ipconfig /all and
press Enter.
Find the value for “Default Gateway”, this is your
router’s local IP address.
For example, it could be “192.168.1.1”.
You can now close the command prompt window.
Type exit and press Enter, or click the cross at the top
right of the window.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Storage Options Homeguard DIY Kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Storage Options Homeguard DIY Kit in the language / languages: English as an attachment in your email.

The manual is 4,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info