Manual Storage Options Homeguard DIY Kit (page 9 of 44) (English)

597133

Zoom out

Zoom in

1/44

storageoptions.com/support 9

1.3 Mounting the cameras

Each Homeguard camera is supplied with a mounting kit for attaching it to a wall. Before you affix the camera in

position, please ensure the cable is of adequate length to reach the DVR.

To mount the camera on a wall or ceiling, follow these instructions:

1. Ensure the surface you want to mount the camera on is solid and can support the weight.

2. Accurately mark on the wall the position of the holes to be drilled.

3. Drill to the correct depth in the wall, as indicated by the plugs.

4. Insert plugs into the drilled holes.

5. If required, drill a hole in the centre to feed the camera cable through the wall. Note the cable can be routed

along the wall via the cut-out in the camera base.

6. Secure the camera to the wall using the provided screws.

To adjust the camera’s position, loosen the screws at the base of the camera and the pivot point on the arm, as well

as the locking ring on the bracket. The camera is now free to be positioned at any angle. Once positioned, tighten

both screws and locking ring again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Storage Options Homeguard DIY Kit in the language / languages: English as an attachment in your email.

The manual is 4,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Storage Options Homeguard DIY Kit Manual

Product: