597133
8
Zoom out
Zoom in
Previous page
1/44
Next page
Homeguard DIY Kit Instruction Manual
8
1.2 Connecting the DVR
Power the DVR directly by using the adapter supplied in the DVR box.
To power the cameras, use the adapter supplied in the camera box, along with the splitter cable, as per the diagram
below:
The cameras are powered via the 18m CCTV cables supplied. The cable carries both the
power to the camera, and the video feed from the camera to the DVR. This setup allows
you to power up to 8 cameras from a single power socket.
CAUTION
The power splitter cable and adapters are designed ONLY for use with Homeguard DVRs and
cameras! DO NOT attempt to connect other brands as this may present a risk of fire!
Connecting the accessories:
Image for illustration purposes only, see DVR specification for details. Accessories not included.
To connect a camera via BNC:
1. Align the BNC connector with the notches on the BNC socket and
slide into place.
2. Rotate the BNC connector clockwise until it locks in place.
To disconnect a camera:
1. Apply pressure to the BNC connector, then rotate anti-clockwise.
2. Slide the BNC connector away from the socket.
To cameras
Splitter cable
12V/3A PSU
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Storage Options Homeguard DIY Kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Storage Options Homeguard DIY Kit in the language / languages: English as an attachment in your email.

The manual is 4,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info