Manual Stomer SRF-40 (page 19 of 28) (English, German, French)

555302

Zoom out

Zoom in

1/28

1. SBM group offers the 2-year warranty from the date of sale

for all its products. Professional and commercial tools are not

covered by the warranty. Repair is only available for a fee in this

case.

2. Non-commercial use of the tools imposes limitations on the

duration of its operation and restricts the intended usage to

household purposes only. The continuous operating time should

not exceed 40 hours. In addition, 10-15 minute breaks are to be

made after every 15 minutes of continuous operation. Ignoring

this condition when using the tools is a violation of the good

operating practice (this provision does not apply to pumps, gen-

erators, chargers and similar equipment). Subject to the above

mentioned condition, the service life of the tools is 7 years.

When you purchase a tool, a warranty card is issued (ﬁ elds with

a date of sale, model, and serial number are mandatory, other

ﬁ elds can also be completed). Please keep the card together

with the sales receipt during the entire warranty period for pres-

entation at the service centre.

Electric tools are only accepted for warranty repairs when as-

sembled with all removable devices and their fastening ele-

ments (bus bars, saw blades, chains, knives, trimmer heads,

injectors, sprockets, bolts, nuts, and mounting ﬂ anges) in work-

ing condition.

3. The warranty period is extended up to 3-5 years*, provided

the owner registers the electric power tool within 2 weeks af-

ter the purchase date. The extended warranty does not cover

rechargeable tools, battery chargers, and supplied accesso-

ries. Registration is only possible online at www.sbm-group.

com. Please print the registration certiﬁ cate at the time of reg-

istration. The certiﬁ cate is the only conﬁ rmation of the fact of

registration. The registration certiﬁ cate should be presented at

the service centre together with the warranty card and sales

receipt.

4. The following malfunctions are eliminated free of charge dur-

ing the warranty period:

• Damage to the instrument, caused by the use of low-quality

materials

• Assembly defects due to the fault of the manufacturer.

5. The warranty does not cover:

• Malfunctions of the tools caused by the failure to comply with

the operating instructions.

• Mechanical damage (cracks, chips, mechanical damage to

power cords, mechanical damage to the enclosure, etc.),

damage caused by exposure to aggressive environments

and high temperatures, damage induced by the ingress of

liquids or foreign matter into ventilation grids of the electric

tools, as well as damage due to improper storage (corrosion

of metal parts, etc.).

• Tools with defects which were caused by an overload (simul-

taneous failure of the rotor and stator), improper use (usage

of blunt, unsuitable, unbalanced, or improperly chosen re-

placement devices), lack of maintenance or care, and use

of the tools for purposes other than the intended purpose

(for example, for processing of materials for which the tool

is not intended, etc.), as well as by the instability of electric

power supply, exceeding the standards set by EN 61000-3-2,

EN 61000-3-3. Among others, undeniable signs of an over-

load include: changes in appearance, deformation or melting

of parts and components of the product, darkening or char-

ring of wire insulation under high temperatures.

• Wear parts and materials (carbon brushes, belts, rubber

gaskets, seals, guards, platforms, bus bars, gears, bearings,

hubs, coil heaters, pulleys, rollers, rods, lock buttons, etc.),

components (gears, shafts, bearings, rods, rollers, etc.) sub-

ject to deterioration due to lubrication wear-out, as well as

replacement devices (drill chucks, SDS cartridges, platforms,

collets, bus bars, ﬂ exible shafts, batteries, battery chargers,

etc.) and supplies (knives, saws, abrasives, saw blades, drill

bits, drills, lubrication, etc.), except in cases of mechanical

damage of the above mentioned products due to failures of

the electric tool which are covered by this warranty.

• Natural wear of the tool, its parts and components (wearing

out of the resource, severe internal or external contamina-

tion, wearing out of the lubrication).

• Tools that were unsealed or repaired during the warranty pe-

riod by persons or organizations who are not legally author-

ized to perform these activities.

• Tools with removed, erased, worn out or changed serial num-

bers, including cases when the data of the electric tool does

not match the data of the warranty card.

• Preventive maintenance of the electric tools, for example,

cleaning, washing, lubrication.

6. Do not operate electric tools exhibiting failure symptoms

(high arcing, smell of burning, increased noise, severe vibration,

uneven rotation, loss of power). Do not use the electric tools

if there is any mechanical damage to the power cord (cracks,

chips, tears, binds), AC plug, or the enclosure of the tool.

7. During the warranty period, faulty parts and components

of the instrument are repaired or replaced free of charge. The

Service Centre reserves the right to decide whether such parts

and components are to be replaced or repaired.

If a failure or malfunction is recognized by SBM group as a war-

ranty case, then it can be removed according to our own choice

by repair or replacement of the defective tool. Replaced tools

and parts become the property of the Service Centre of SBM

group.

8. GUIDELINES FOR THE PREVENTIVE MAINTENANCE OF

ELECTRIC TOOLS

Regular preventive maintenance (cleaning, washing, relubrica-

tion of bearings and gearbox, replacement of fast wearing parts)

is recommended for the tools. Maintenance ensures perfect op-

eration of the electric tool during its entire service life cycle. The

frequency of preventive maintenance at rated load is determined

according to the natural wear of carbon brushes. Maintenance

work is charged according to the price list of the service centre.

Any failures covered by the warranty and detected in the course

of maintenance are repaired free of charge. Warranted failures,

which are detected by the diagnostics, are eliminated as agreed

by the parties according to the routine procedure.

Preventive maintenance does not extend the duration of the

warranty period.

Other claims, except for the above mentioned right for free re-

medial measures, are not covered by this warranty.

9. This warranty does not affect other legal consumer rights

granted by the applicable laws.

* Depending on the model.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stomer SRF-40 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stomer SRF-40 Manual

Product: