537284
17
Zoom out
Zoom in
Previous page
1/208
Next page
FW 20
English
15
N Slacken the two nuts (1) on the
underside of the cart
If the direction deviates to the left
N Swing the support (2) a few
millimeters to the left and retighten
the two nuts
If the direction deviates to the right
N Swing the support (2) a few
millimeters to the right and retighten
the two nuts
N Check the direction again and
repeat the adjustment until it is
correct.
A minor adjustment is usually all that is
needed to correct any deviation in
direction.
Cutting close to kerb stones
When cutting close to kerb stones, the
right-hand wheel can be relocated from
outboard to inboard position, thus
making it unnecessary to change the
abrasive wheel to the "outboard"
position.
N Remove the screw (1) and take the
wheel with axle out of the bearing in
the frame, then refit it on the inboard
side and secure it with the screw.
Cutting kerb stones
For cutting kerb stones, the front wheel
can be mounted in a position further to
the rear.
N Unscrew nut (1) and remove with
washer (2)
N Remove wheel (3)
N Insert axle of wheel (3) in the rear
hole
N Slide on washer (2), screw on and
tighten nut (1)
1
1
379BA037 KN
379BA056 KN
Relocating the wheel
379BA039 KN
1
2
379BA062 KN
1
3
2
379BA063 KN
1
3
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl STIHL FW 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl STIHL FW 20 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info