Manual Stihl STIHL FW 20 (page 16 of 208) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

537284

Zoom out

Zoom in

1/208

FW 20

English

Setting the limit stop

N Unscrew lock nut (1) and unscrew

bolt (2) to maximum position

Use the cutting depth adjustment to set

the desired maximum cutting depth.

N Screw in the bolt (2) until it rests

against the swivel arm (3) and

secure with lock nut (1)

Each time it is lowered with the cutting

depth adjustment against the limit stop,

the same cutting depth is attained.

Throttle control

Start engine, refer to the chapter

"Starting / stopping the engine" in the

Instruction Manual for the cut-off

machine.

The throttle is not actuated via the

handle on the cut-off machine, but via

the throttle control on the guide tube.

N Press and hold the trigger switch

lockout (1)

N Pull the throttle control (2) until it

contacts the guide tube - full throttle

position

The speed of the cut-off machine

depends on the distance between

throttle control and guide tube.

When the throttle control is released

completely (no-load setting), the trigger

switch lockout must be pressed again

before the throttle control can be

actuated.

N Push the guide tube down and

unlock the depth limiter

N Slowly lower the cart until the

abrasive wheel touches the ground

N Carefully lift the wheel of the swivel

arm so that the abrasive wheel and

rear wheels touch the ground

(diagram)

N Lock the depth limiter in place

N Line up the abrasive wheel and cart

on a straight line (marked) and

gently push off the cart so that it rolls

freely for a few meters

379BA060 KN

379BA061 KN

Adjusting the direction

379BA054 KN

379BA055 KN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stihl STIHL FW 20 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stihl STIHL FW 20 Manual

Product: