667248
179
Zoom out
Zoom in
Previous page
1/196
Next page
MS 193 C
italiano
177
Impostazione del minimo
N Eseguire l’impostazione standard
N Avviare il motore e lasciarlo
scaldare
N Prima di iniziare l’impostazione del
minimo, lasciare scaldare il motore
per 10 secondi al minimo.
Il motore si ferma al minimo
N Girare in senso orario la vite di
arresto del minimo (LA) finché la
catena comincia a essere trascinata
– poi tornare indietro di 1 giro
La catena è trascinata al minimo
N Girare in senso antiorario la vite di
arresto del minimo (LA) fino quando
la catena si ferma – poi girare
ancora di 1 giro nella stessa
direzione.
AVVERTENZA
Se dopo la regolazione la catena non si
ferma al minimo, fare riparare la
motosega dal rivenditore.
Regime del minimo irregolare;
accelerazione scadente (nonostante
l’impostazione standard della vite di
registro del minimo)
L’impostazione del minimo è troppo
povera.
N girare in senso antiorario la vite di
registro del minimo (L) finché il
motore non gira regolarmente e
accelera bene – max. fino
all’arresto.
Dopo ogni correzione della vite di
registro del minimo (L) in genere è
necessario variare anche la vite di
arresto del minimo (LA).
Correzione dell’impostazione del
carburatore nell’impiego ad alta quota
Se il motore non gira in modo
soddisfacente, può essere necessaria
una leggera correzione:
N Eseguire l’impostazione standard
N Lasciare scaldare il motore
N Girare leggermente in senso orario
(più povera) la vite di registro
principale (H) – max. fino all’arresto
AVVISO
Dopo il ritorno dall’alta quota, riportare
l’impostazione del carburatore a quella
standard.
Con regolazione troppo povera vi è il
rischio di danni al propulsore per
mancanza di lubrificazione e per
surriscaldamento.
N se la potenza del motore è
insufficiente, l’avviamento
difficoltoso o il regime irregolare,
controllare prima di tutto la candela
N dopo circa 100 ore di esercizio
sostituire la candela – anche prima
se gli elettrodi sono molto corrosi –
usare solo candele schermate
omologate da STIHL – ved. „Dati
tecnici“.
Smontaggio della candela
N afferrare con un attrezzo adatto la
linguetta sul raccordo candela
N facendo leva, togliere il raccordo
candela
N Svitare la candela
418BA011 KN
L
LA
Candela
418BA009 KN
179


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS193 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS193 in the language / languages: German, Dutch, French, Italian as an attachment in your email.

The manual is 7,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS193

Stihl MS193 User Manual - English, Spanish - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info