537132
98
Zoom out
Zoom in
Previous page
1/122
Next page
97MS 240, MS 260, MS 260 C
: Pull the fuel hose (1) off the stub
(arrow).
: Push the nipple (1)
0000 855 9200 into the fuel hose
(arrow).
Vacuum test
: Push the ring (1) to the left and
connect the pump (2)
0000 850 1300 to the nipple
(arrow) – subject the fuel tank to
a vacuum.
165RA390 TG
1
165RA391 TG
1
165RA392 TG
1
2
Equalization of pressure takes
place via the tank vent. There must
be no buildup of vacuum in the tank.
Clean the area around the tank
vent.
If necessary, install a new tank
vent or tank, b 14.7 or b 14.8.3
Pressure test
: Push the ring (1) to the right and
connect the pump (2)
0000 850 1300 to the nipple
(arrow)
– pressurize the fuel tank.
Operate the pump (2) until the
pressure gauge indicates a
pressure of 0.5 bar. If this
pressure remains constant for at
least 20 seconds, the tank,
including the tank vent, is airtight.
If the pressure drops, the leak
must be located and the faulty
part replaced.
Reassemble in the reverse
sequence.
165RA393 TG
1
2
14.7.2 Removing and Installing
Remove the carburetor box
cover, b 9.2.1
: Pry out the tank vent (1) at the
recess (arrow).
Always install a new tank vent.
Coat sealing ring of new tank
vent (1) with STIHL press fluid,
b 17
Press the new tank vent (1) into
the bore as far as stop.
Reassemble all other parts in the
reverse sequence.
165RA394 TG
1
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info