537132
96
Zoom out
Zoom in
Previous page
1/122
Next page
95MS 240, MS 260, MS 260 C
: Press the tank housing (1) down
slightly and push the manifold
flange (2) out of the tank housing
in the direction of the cylinder.
Pull the impulse hose off the
connector.
: Loosen and remove the hose
clamp (1).
Pull off the intake manifold (2).
Inspect the intake manifold (2)
and replace it if necessary – even
very minor damage can result in
engine running problems, b 4.7
Coat the manifold flange (2) with
STIHL press fluid, b 17
Push on the intake manifold (2)
position, line it up and secure it in
position, b 8.6
1
165RA379 TG
2
1
165RA380 TG
2
: Push the impulse hose (1) on to
the connector (arrow).
: To pull the manifold flange
through the intake opening in the
tank housing, wind a piece of
string (1) (about 15 cm long)
around the back of the flange and
pass the ends of the string
through the opening.
Position the manifold flange
against the tank housing.
1
165RA381 TG
1
165RA382 TG
: Pull the ends of the string with the
manifold flange through the
opening.
This method ensures that the
manifold flange is pulled into place
without any damage.
Remove the string.
: Fit the washer (1) and ring (2).
When reassembling, check that all
wires are properly seated in their
guides.
Reassemble all other parts in the
reverse sequence.
Tightening torques, b 3.5
165RA383 TG
1
165RA384 TG
2
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info