537132
90
Zoom out
Zoom in
Previous page
1/122
Next page
89MS 240, MS 260, MS 260 C
14.4.1 Inlet Needle
Remove the metering
diaphragm, b 14.4
: Take out the screw (arrow).
: Pull the inlet control lever (1) with
spindle (2) out of the inlet
needle’s groove.
The small spring under the inlet
control lever may pop out.
: Remove the inlet needle (1).
Remove the spring (2). Inspect
and replace if necessary.
165RA345 TG
2
1
165RA345 TG
2
1
165RA347 TG
: If there is an annular indentation
(arrow) on the sealing cone of the
inlet needle, fit a new inlet
needle.
: Fit the inlet needle (1).
: Fit the spring (2) in the bore.
: Position the inlet control lever (3)
with spindle (2) on the spring’s
seat (arrow) first, then slide the
inlet control lever’s clevis into the
groove in the inlet needle (1).
165RA348 TG
2
1
165RA349 TG
2
1
3
165RA489 TG
Make sure the spring locates on the
control lever’s nipple.
Press the inlet control lever down
and secure it with the screw.
Check that inlet control lever
moves freely.
Install the metering diaphragm,
b 14.4
14.4.2 Fixed Jet
Remove the metering
diaphragm,
b 14.4
: Unscrew the fixed jet (1) with a
suitable screwdriver.
Take care not to damage the fixed
jet (1).
Check the fixed jet (1) and
replace if necessary
Reassemble in the reverse
sequence.
165RA351 TG
1
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info