537132
28
Zoom out
Zoom in
Previous page
1/122
Next page
27MS 240, MS 260, MS 260 C
: Remove the E-clip (arrow).
Pull the cam lever (1) off the pivot
pin.
Check the cam lever (1) and
spring (2) and replace if
necessary.
Check the condition of the cam
contour (arrow) and replace the
hand guard if necessary.
Position the cam lever (1) so that
its cam (arow) faces the cam on
the hand guard.
: Push the cam lever (1) on to the
pivot pin (2).
165RA061 TG
1
1
165RA062 TG
2
165RA063 TG
1
2
: Fit the E-clip (1).
: Attach the spring (1) to the cam
lever so that the open side of the
spring hook (Pfeil) points toward
the housing.
If the groove in the spring's anchor
pin is worn, install a new pin, b 7.5
Attach the spring (1) to the anchir
pin (2).
The cam lever is not yet under
tension – the spring may become
detached.
Reassemble all other parts in the
reverse sequence.
Tightening torques, b 3.5
Lubricate the cam lever, b 17
165RA064 TG
1
1
165RA065 TG
2
7.5 Pins
The anchor pins secure the springs.
Worn pins must be replaced
– the springs may otherwise
become detached and pop out.
All parts have been removed from
the pins in the following illustrations
for greater clarity.
: Use a suitable tool to pull out the
pins (arrows).
Before installing the new pin (1),
coat its knurled shank with
Loctite, b 17
: Position the new pin (1) in the
bore (arrow) so that the knurling
on the pin meshes with the
existing knurling in the bore.
Turn the pin (1) back and forth as
necessary.
165RA066 TG
165RA067 TG
1
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info