537132
27
Zoom out
Zoom in
Previous page
1/122
Next page
26 MS 240, MS 260, MS 260 C
: Lift the bearing boss of the hand
guard and the brake lever a little
and position them over the pivot
pins (arrows).
: Turn the cam lever (1) to one side
until the cam of the hand guard
(arrow) slips passed it.
Push the hand guard bearing
boss and the brake lever on to
the pivot pins.
: Fit the E-clip (1).
165RA054 TG165RA055 TG
1
165RA056 TG
1
: The turns of brake spring must be
tightly against one another in the
relaxed condition. If this is not the
case, replace the brake spring.
Check the correct position of the
protective hose – it must be
centered in the spring.
a = 20 mm
If the groove in the brake spring
anchor pin is worn, install a new pin,
b 7.5
: Attach the brake spring (1) to the
brake lever (arrow).
165RA057 TG
165RA058 TG
1
: Use the assembly tool (2)
1117 890 0900 to attach the
brake spring (1) to the anchor pin
(arrow).
Reassemble all other parts in the
reverse sequence.
Tightening torques, b 3.5
Lubricate the brake lever, b 17
7.4 Cam Lever
The cam lever defines the locked
position of the hand guard.
Remove the brake lever, b 7.3
: Disconnect the spring (1) from
the anchor pin (arrow).
165RA059 TG
2
1
1
165RA060 TG
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl MS 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl MS 240 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl MS 240

Stihl MS 240 User Manual - German, Dutch, French, Italian - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info