Manual Stihl HTA 65 (page 67 of 280) (English, German, Dutch, French, Italian, Portuguese, Spanish)

667200

Zoom out

Zoom in

1/280

HTA 65, HTA 85

English

For checking angles

Use a STlHL filing gauge (special

accessory, see table "Sharpening

Tools"). This is a universal tool for

checking the filing and side plate angles,

depth gauge setting, cutter length and

groove depth. It also cleans the guide

bar groove and oil inlet holes.

File correctly

N Move the retaining latch to ƒ.

N Take the battery out of the machine.

N Select sharpening tools according

to chain pitch.

N Clamp the bar in a vise if necessary.

N The saw chain cannot be locked in

place on the guide bar. To

resharpen the chain by hand,

increase tension of the chain until it

can longer be pulled along the bar.

The chain must be re-tensioned

after sharpening. The alternative is

to remove the chain from the guide

bar and resharpen it on a bench-

mounted sharpener (FG 2, HOS,

USG).

N If you use an FG 2, HOS or USG

sharpener: Remove the chain from

the bar and sharpen according to

the instructions supplied with the

tool.

N Sharpen the chain frequently, take

away as little metal as possible –

two or three strokes of the file are

usually enough.

N Hold the file horizontally (at a right

angle to the side of the guide bar)

and file according to the angles

marked on the file holder. Rest the

file holder on the top plate and depth

gauge.

N Always file from the inside to the

outside of the cutter.

N The file only sharpens on the

forward stroke – lift the file off the

cutter on the backstroke.

N Avoid touching the tie straps and

drive links with the file.

N Rotate the file at regular intervals

while filing to avoid one-sided wear.

N Use a piece of hardwood to remove

burrs from the cutting edge.

N Check angles with the filing gauge.

All cutters must be the same length.

If the cutters are not the same length,

they will have different heights. This

makes the chain run roughly and can

cause it to break.

N Find the shortest cutter and then file

all other cutters back to the same

length. It is best to have this work

done in the workshop on an electric

grinder.

Depth gauge setting

The depth gauge determines the height

at which the cutter enters the wood and

thus the thickness of the chip removed.

a Specified distance or setting

between depth gauge and cutting

edge.

This setting may be increased by

0.2 mm (0.008") for cutting softwood in

the mild weather season – no frost.

001BA203 KN

689BA018 KN

90°

689BA043 KN

689BA023 KN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stihl HTA 65 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 14,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stihl HTA 65 Manual

Product: