537294
27
Zoom out
Zoom in
Previous page
1/40
Next page
GS 461
English
25
N Fit the pawls (6) in the rope rotor
N Place the washer (5) on the starter
post
N Press the spring clip (4) on to the
starter post and over the pegs of the
pawls with a screwdriver or suitable
pliers - note position of spring clip
Tension the rewind spring
N Make a loop in the unwound starter
rope and use it to turn the rope rotor
six full revolutions in the direction of
the arrow
N Hold the rope rotor tight – pull out
the twisted rope and untangle it
N Release the rope rotor
N Slowly let go of the rope so that it
winds on to the rotor. The starter
grip must be drawn firmly into the
rope guide bushing. If it tips
sideways: increase the spring
tension by another turn.
N It must be possible to turn the rope
rotor another half-turn when the
rope has been drawn out
completely. If not, the spring has
been tensioned too tightly and may
break! Remove one turn of the rope
from the rotor
N Install the fan housing
N Set master control lever to STOP or
0 and press the remaining rope into
the handle – until the nipple is flush
with the handle
Replacing broken rewind spring
N Remove the rope rotor - see section
"Replacing torn starter rope"
WARNING
The broken pieces of spring may still be
under tension and can spring apart
unexpectedly on removal risk of injury!
Wear a face shield and protective
gloves.
N Undo the screws and remove the
spring housing
N Carefully pry out the broken pieces
of spring with a screwdriver
N Apply a few drops of non-resinous
oil to the new replacement spring
N Position the replacement spring
with frame in the fan housing – the
anchor loop (arrow) must be located
over the retaining lug in the fan
housing
N Apply suitable tools (screwdriver,
punch, etc. ) to the recesses and
push the spring into its seat in the
fan housing the spring slides out of
the frame holder.
N Remove spring housing, reinstall
the rope rotor, tension the rewind
spring, replace the fan housing and
screw it into place
5
2411BA037 KN
4
6
6
2411BA038 KN
2411BA039 KN
213BA022 KN
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl GS 461 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl GS 461 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl GS 461

Stihl GS 461 User Manual - German, Dutch, French, Italian - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info