537294
26
Zoom out
Zoom in
Previous page
1/40
Next page
GS 461
English
24
Removing the fan housing
N Remove screws (1)
N Push the hand guard (2) upwards
N Pull the bottom of the fan
housing (3) away from the
crankcase and remove downwards
Replacing a torn starter rope
N Carefully press the spring clip (4) off
of the axle with a screw driver or
suitable pliers
N Remove washer (5)
N Remove the pawls (6)
N Remove the rope rotor (7)
N Lever the rope out of the starter
handle with a screwdriver
N Remove the remainder of the rope
from the rotor and starter handle
N Thread a new ElastoStart starter
rope from top to bottom through the
starter handle and
N Press the remaining rope into the
handle until the nipple is flush with
the handle
N Thread the starter handle with the
starter rope from top to bottom
through the rope guide bush (8)
N Pull the starter rope through the
rope rotor (7) and secure it with an
overhand knot
N Coat the bearing bore in the rope
rotor with non-resinous oil
N Slip the rope rotor onto the starter
post (9) – turn it back and forth a
little until the anchor loop of the
rewind spring engages
Replacing the Starter Rope
and Rewind Spring
1
1
1
1
2
3
2411BA034 KN
5
2411BA035 KN
4
6
7
6
213BA019 KN
8
7
2411BA036 KN
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl GS 461 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl GS 461 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl GS 461

Stihl GS 461 User Manual - German, Dutch, French, Italian - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info