52161
21
Zoom out
Zoom in
Previous page
1/72
Next page
FG 3
English
19
N Measure tooth length (A)
If the tooth length varies from the length
of the master cutter:
N Move stop (3) forward or backward
and sharpen again
N Check tooth length (A)
N If necessary, repeat until there is no
longer any deviation
N Sharpen all cutters in the second
row of cutter using this setting
Depth gauge
N Select the appropriate file
gauge(special accessory) for the
chain pitch
N Place selected file gauge (1) on the
saw chain
N Check height of the depth gauge
If the depth gauge protrudes above the
file gauge, it must be reworked.
N Set sharpening angle on guide
piece to 0°
N Advance saw chain until a depth
gauge is under the file
N Replace round file with the
triangular file (2) (special
accessory)
N Set stop (3) so that the file does not
touch the cutting edge
N Set depth adjusting screw (4) so
that the depth gauge is filed down to
the necessary height (flush with the
gauge)
N Remove the file gauge and file all
depth gauges with this setting
566BA024 KN
A
566BA025 KN
3
Chain pitch File gauge
Inches mm Part number
1/4 6.35 1110 893 4000
3/8 P 9.32 1110 893 4000
0.325 8.25 1110 893 4000
3/8 9.32 1110 893 4000
0.404 10.26 1106 893 4000
564BA018 KN
30
35
564BA019 KN
33
2
566BA016 KN
4
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FG3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FG3 in the language / languages: German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl FG3

Stihl FG3 User Manual - English - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info