52161
20
Zoom out
Zoom in
Previous page
1/72
Next page
FG 3
English
18
Sharpening the master cutter
N Sharpen the master cutter with 2 or
3 rapid file strokes from the inner to
outer edge of the tooth face
N Check whether the stop tube (1) lies
against the stop roller (2)
N If necessary, readjust the stop (3)
and advance saw chain. Check stop
position again
Sharpening the first row of cutters
N Sharpen all cutters in this row of
cutters using the setting made with
the master cutter
N Swivel filing frame upward
N Advance saw chain to the next
cutter in this row of cutters – press
cutter against stop
Make certain that the stop (3) always
lies precisely against the back of the
cutter that is to be sharpened.
N Swivel filing frame downward
N Sharpen cutter
N Repeat operation until all cutters in
a row of cutters have been
sharpened
Sharpening the second row of cutters
Once all cutters in the first row of cutters
have been sharpened, the sharpening
tool must be set up for the other row of
cutters. Adjustments are made as
described in "Adjustment".
N Swivel filing frame upward
N Loosen the knurled nut (1)
N Lift the guide piece completely out
of the toothing turn to the identical
angle marking on the opposite side
N Tighten knurled nut
N Re-clamp guide bar, rotated by
180°, in a vise or in a STIHL bar
clamp (special accessory)
N Re-clamp file
N Swivel filing frame downward
N Move the round file downward
between the tooth face and depth
gauge of the first cutter in the
second row of cutters
N Sharpen the first cutter in the
second row of cutters
Sharpening
2
1
1
3
2
566BA011 KN
3
566BA013 KN
1
566BA022 KN
566BA023 KN
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FG3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FG3 in the language / languages: German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl FG3

Stihl FG3 User Manual - English - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info