52159
21
Zoom out
Zoom in
Previous page
1/88
Next page
FG 2
English
19
N Then turn the knurled nut a little
further until the side plate presses
against the file and the stop bar (6)
is lifted about 0.1 to 0.2 mm away
from the stop roller (5).
N Swing the clamping lever (7) to the
right – the saw chain is locked in
position.
Sharpening the Master Cutter
N Sharpen the master cutter with 2 to
3 firm strokes of the file, from the
inside to the outside of the side
plate.
N Check that the stop bar (1) butts
against the stop roller (2).
N If this is not the case, readjust the
stop bar (3) and move the chain up
against it – check the stop position
again.
Sharpening the Row of Cutters
N Use the setting for the master cutter
to sharpen all the other cutters in the
row.
N Swing the filing frame upwards.
N Open the clamping lever.
N Pull the chain along to the next
cutter in the row – push cutter
against the stop.
Make sure the stop (3) always locates
properly against the back of the cutter
being sharpened.
N Close the clamping lever.
N Swing the filing frame down.
N Sharpen the cutter.
N Repeat this procedure until all
cutters in one row have been
sharpened.
Sharpening the Second Row of Cutters
After sharpening all the cutters in the
first row, set the filing tool for the second
row of cutters. Follow description under
"Adjustments".
6
5
7
564BA032 KN
5
6
Sharpening
1
2
3
564BA013 KN
2
1
564BA014 KN
3
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FG2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FG2 in the language / languages: German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl FG2

Stihl FG2 User Manual - English - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info