52159
19
Zoom out
Zoom in
Previous page
1/88
Next page
FG 2
English
17
Clamping the Saw Chain
N Place the saw chain in the chain rest
the cutting edges must point to the
right.
N Turn the clamping lever (1) to the
right – the longitudinal rib on the
clamping lever must face outwards.
N Tighten down the lock nut (2)
moderately until the chain is locked
in position.
N Swing the clamping lever to the left
to release the chain and to the right
to lock the chain.
Positioning the Chain Rest
Turn the chain rest through 180° to suit
the position of the master cutter in the
row:
Illustration A master cutter in left-hand
row
Illustration B – master cutter in right-
hand row
The sharpening procedure described
below assumes the master cutter is in
the left-hand row.
The procedure is the same if the master
cutter is in the right-hand row. Move the
chain rest to the position shown in
illustration B, reset the file, adjust angle.
Adjusting Filing Angle
N Check filing angle in the following
table
N Swing the filing frame upwards.
N Loosen the knurled nut (1).
N To rotate the guide, lift it clear of the
teeth.
1
564BA004 KN
2
564BA033 KN
A
B
Adjustments
Chain type Filing angle
Rapid Standard (RC...) 30°
Rapid Micro (RM...) 30°
Rapid Super (RS...) 30°
Picco Micro (PM...) 30°
Picco-Super (PS...) 30°
Ripping chain
(RCX, RMX, PMX) 10°
1
564BA006 KN
564BA007 KN
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl FG2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl FG2 in the language / languages: German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl FG2

Stihl FG2 User Manual - English - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info