667242
9
Zoom out
Zoom in
Previous page
1/208
Next page
ASA 85
English
7
Releasing blockages
If the branch diameter is too large, the
cutting blade locks in position during
closing. The cutting blade can only be
opened from this position.
NOTICE
If the pruning shears are jammed in the
cut, do not switch them off at the
controller since mechanical parts may
otherwise be damaged during removal
from the wood. To release the blockage,
always leave the pruning shears
switched on and remove them from the
wood as follows.
N Swing the pruning shears upwards
and pull them out of the cut.
Do not attempt to lever them out of the
cut sideways or downwards.
Sharpening the Cutting Blade
The sharpness of the cutting blade
influences the quality of the cut.
A dull cutting blade:
increases the cutting force required
consumes more energy (fewer cuts
per battery charge)
increases wear on blade and all
mechanical parts
The resharpening frequency depends
on the hardness and diameter of the
wood being cut and the cutting rhythm.
Check sharpness of cutting blade at
regular intervals.
Sharpening intervals
When using the pruning shears for the
first time or after changing the blade,
check and resharpen the blade after the
first half hour of operation. Also check
the play between the cutting and anvil
blades and readjust if necessary.
Check sharpness of the blade at regular
intervals and resharpen it in good time.
A visual check every quarter hour
quickly gives you a feeling for how often
the blade needs resharpening.
During the cutting season, sharpen the
blade as required, but at least once a
day.
Possible Factors Influencing Running
Time
There are different factors that can
cause the running time of your cordless
pruning shears to vary.
Influencing factors are, e.g.:
Temperature
Battery's state of charge
Type of material being cut
(hardness, diameter)
Sharpness of blade
Preset blade opening
Too much play between cutting and
anvil blades
To reduce the risk of
injury, do not touch the
blades.
4816BA033 KN
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl ASA 85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl ASA 85 in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 10,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl ASA 85

Stihl ASA 85 User Manual - German, Dutch, French, Italian, Polish, Portuguese, Spanish - 296 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info