667242
7
Zoom out
Zoom in
Previous page
1/208
Next page
ASA 85
English
5
Watch out for tree stumps, roots and
rocks which could cause you to stumble
or fall.
To reduce the risk of accidents, take a
break in good time to avoid tiredness or
exhaustion.
Work calmly and carefully – in daylight
conditions and only when visibility is
good. Stay alert so as not to endanger
others.
The power tool is operated by one-
person only. Do not allow any other
persons in the work area.
Observe the blades – only cut in areas
that you can see.
Be extremely careful when cutting dense
rows of plants, check the other side
before starting work.
To avoid the risk of electrocution, do not
touch electric power lines – never cut
through electric power lines.
When working at heights:
Always use a lift bucket
Never work on a ladder or in a tree
Never work on an insecure support
Never hold a branch with your free hand
directly next to the point you want to cut.
Always maintain a distance of at least
40 cm from the blades. Never touch the
cutting blade. It is very sharp – risk of
injury.
Be wary of flying or splintering material
wear safety glasses.
Clear away fallen branches, scrub and
cuttings only when your cordless
pruning shears are in the standby mode
and fitted in the holster.
In the event of danger or an emergency,
switch off your power tool immediately
and disconnect the connecting cord.
If your power tool is subjected to
unusually high loads for which it was not
designed (e.g. heavy impact or a fall),
always check that it is in good condition
before continuing work – see also
"Before Starting Work". Make sure the
safety devices are working properly. Do
not continue using a power tool that is
not in a safe operating condition. In case
of doubt, consult your servicing dealer.
After Finishing Work / Storing
When the power tool is not in use, put it
in a place where it does not endanger
others. Secure it against unauthorized
use.
Always close the cutting blade, i.e.
standby mode.
Move switch on controller to OFF.
Disconnect the connecting cord
from the power tool.
Put your cordless pruning shears in
the holster.
Remove the battery.
Vibrations
This power tool minimizes the vibrations
transmitted to the operator's hands.
However, the operator should seek
medical advice in the event of suspected
circulatory problems in the hands (e.g.
tingling sensation in the fingers).
Maintenance and Repairs
Before performing any repairs, cleaning
or maintenance work:
Always close the cutting blade, i.e.
standby mode.
Move switch on controller to OFF.
Disconnect the connecting cord
from the power tool.
This avoids the risk of the cutting blade
closing unintentionally.
Service the power tool regularly. Do not
attempt any maintenance or repair work
not described in the instruction manual.
Have all other work performed by a
servicing dealer.
Only use high-quality replacement parts
in order to avoid the risk of accidents
and damage to your cordless pruning
shears. If you have any questions in this
respect, consult a servicing dealer.
Check the electrical contacts and ensure
that the insulation of the connecting
cords and plug of the charger show no
sign of aging (brittleness).
To reduce the risk of serious injury, have
work on the charger (e.g. replacing the
connecting cord) performed only by an
authorized servicing dealer or qualified
electrician.
Observe sharpening instructions keep
the blades in good condition at all times
to ensure safe and proper operation.
To reduce the risk of injury in the event
of a malfunction, switch off the power
tool immediately, disconnect the
connecting cord and remove the battery.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl ASA 85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl ASA 85 in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 10,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl ASA 85

Stihl ASA 85 User Manual - German, Dutch, French, Italian, Polish, Portuguese, Spanish - 296 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info