537181
25
Zoom out
Zoom in
Previous page
1/192
Next page
ADG 2
English
23
If the red light emitting diodes glow /
flash
The light emitting diode (1) on the
analyzer can glow or flash green, yellow
or red.
Green continuous light
Cordless power tool or function in
order.
Yellow continuous light
Intermittent fault in cordless power
tool in the past (e.g. loose contact),
power tool ready for operation at the
moment the fault can be called up
in the power tool's fault memory.
Red continuous light
Active fault in cordless power tool,
power tool is not ready for operation
at the moment – a fault code is
displayed.
Problem – see "Troubleshooting"
Red flashing light
... may mean the following:
Observe safety information on
display
Fault in analyzer (analyzer's display
remains blank) – software update
required.
STIHL diagnostic software may be used
only in conjunction with STIHL
analyzers.
System Requirements
STIHL diagnostic software may only be
installed on a computer that meets the
system requirements. Administrator
rights are required for installation under
Microsoft
®
Windows
®
– contact the
system administrator if necessary.
Operating System
Microsoft
®
Windows
®
XP SP 3 or
Microsoft
®
Windows Vista
®
or
Microsoft
®
Windows
®
7
Software Requirements
Microsoft
®
.NET 3.5 SP 1 or higher
Adobe
®
Acrobat
®
Reader 9 or
higher
Hardware Requirements
Minimum Requirements
CPU 1 GHz
256 MB free memory
a minimum of 100 MB hard disk
space
Resolution – SVGA monitor
(minimum resolution 1024 x 768)
USB interface 1.1 or higher
CD-ROM or DVD drive
1 light emitting diode
glows continuously
red:
Battery too
hot/cold
1)
1)
Remove the battery from the
analyzer to cool it down/warm it up.
After cooling down/warming up,
restart the test – insert the battery
in the analyzer.
2)
Take the battery out of the analyzer
and refit it again – if the LEDs still
flash, the analyzer is faulty and
must be replaced.
4 light emitting diodes
flash red:
Fault in battery
2)
4901BA008 KN
Light Emitting Diodes (LEDs)
on Analyzer
1
7BA006 KN
Diagnostic software
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl ADG 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl ADG 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info