52143
51
Zoom out
Zoom in
Previous page
1/56
Next page
6SHFLILFDWLRQV
(QJLQH
STIHL single cylinder two-stroke engine
Displacement: 61.5 cm
3
(3.75 cu.in)
Bore: 48 mm (1.89 in)
Stroke: 34 mm (1.34 in)
Idle speed: 2,500 r.p.m.
Maximum engine
speed
(cut-off speed): 13,500 rpm
,JQLWLRQ6\VWHP
Type:
Electronic magneto ignition (breakerless)
Ignition timing:
1.9 - 2.5 mm (0.075 - 0.1 in) B.T.D.C.
at 8,000 r.p.m.
Spark plug (suppressed):
Bosch WSR 6 F or NGK BPMR 7 A;
Electrode gap 0.5 mm (0.02 in)
Spark plug thread M 14x1.25,
9.5 mm (0.37 in) long
)XHO2LO6\VWHP
Carburetor:
All position diaphragm carburetor
with integral fuel pump
Air filter:
Prefilter and bisectional box filter
Fuel tank capacitiy:
0.625 l (1.32 US pt)
Fuel mixture: see chapter "Fuel"
Chain lubrication:
Fully automatic, speed-controlled
reciprocating oil pump.
Additional manual oil flow control
Oil tank capacity:
0.32 l (0.68 US pt)
:HLJKW
without bar and chain
5.7 kg (12.6 lb)
&XWWLQJ$WWDFKPHQW
Recommended cutting attachments
for compliance with § 5.12 of ANSI
Standard B 175.1-1991
(see page 11 of this Manual):
STIHL reduced kickback bar
(with green label):
for 0.325" and 3/8" pitch:
Rollomatic with sprocket nose
40, 45 or 50 cm (16, 18 or 20 in)
STIHL low kickback chain*
(with green label):
8.25 mm (0.325") Rapid-Micro 2
(26 RM 2)
9.32 mm (3/8") Rapid-Micro 2
(33 RM 2, 36 RM 2)
Chain sprocket:
8-tooth for 0.325" pitch or
7-tooth for 3/8" pitch
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
Other bars and chains available for this
powerhead are:
STIHL yellow-labeled bars:
for 0.325" and 3/8" pitch:
Rollomatic "S" with sprocket nose
40, 45, 50 cm (16, 18, 20 in)
60 cm (24 in) 3/8" pitch only
Duromatic with stellite tipped nose
40, 45, 50 cm (16, 18, 20 in)
60 cm (24 in) 3/8" pitch only
STIHL yellow -labeled chains:
for 0.325" pitch:
Rapid-Super (26 RS),
Rapid-Micro (26 RM)
for 3/8" pitch:
Rapid-Micro (33 RM, 36 RM),
Rapid-Super (33 RS, 36 RS, 33 RSL,
Rapid-Duro 33 RD).
In order to comply with the kickback
performance requirements of § 5.12
of ANSI Standard B 175.1-1991,
do not use replacement saw chain
unless it has been designated as
meeting the ANSI § 5.12 requirements
on this specific powerhead, or has
been designated as "low kickback"
saw chain* in accordance with the
ANSI B 175.1-1991 standard.
*See definition of "low kickback chain"
on page 15 of this Manual.
 
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 036 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 036 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info