52143
49
Zoom out
Zoom in
Previous page
1/56
Next page
'HSWKJDXJHVHWWLQJ
The depth gauge determines the height
at which the cutter enters the wood and
thus the thickness of the chip removed.
Distance between depth gauge and
cutting edge = D
Chain Depth gauge
pitch distance “D
Inch (mm) mm (Inch)
1/4 (6.35) 0.65 (0.026)
3/8-PM (9.32) 0.65 (0.018)
3/8-PMN (9.32) 0.45 (0.026)
0.325 (8.25) 0.65 (0.026)
3/8 (9.32) 0.65 (0.026)
0.404 (10.26) 0.80 (0.031)
This setting may be increased by 0.2 mm
(0.008") for cutting softwood in mild
weather season - no frost.
/RZHULQJGHSWKJDXJHV
The depth gauge setting is reduced
when the chain is sharpened. Use filing
gauge to check the setting every time
you sharpen the chain and, if necessary,
lower the depth gauge with a flat or
triangular file so that it is level with the
filing gauge.
Round off depth gauges parallel to the
stamped marking.
$IWHUVKDUSHQLQJ
Clean the chain thoroughly, remove
filings or grinding dust - lubricate the
chain by immersing it in an oil bath.
%HIRUHORQJRXWRIVHUYLFHSHULRG
Clean the chain with a brush and
immerse it in an oil bath.
689BA024 KN
a
689BA023 KN
6KDUSHQLQJWRROV
Chain pitch Round file Ø Round file File holder Filing gauge Flat file Sharpening kit*
Inch (mm) mm (Inch) Part No. Part No. Part No. Part No. Part No.
1/4 (6.35) 4.0 (5/32) 5605 772 4006 5605 750 4327 1110 893 4000 0814 353 3356 5605 007 1027
3/8 PMN (9.32) 4.0 (5/32) 5605 772 4006 5605 750 4327 0000 893 4000 0814 353 3356 5605 007 1026
3/8 P (9.32) 4.0 (5/32) 5605 772 4006 5605 750 4327 1110 893 4000 0814 353 3356 5605 007 1027
0.325 (8.25) 4.8 (3/16) 5605 772 4806 5605 750 4328 1110 893 4000 0814 353 3356 5605 007 1028
3/8 (9.32) 5.2 (13/64) 5605 772 5206 5605 750 4329 1110 893 4000 0814 353 3356 5605 007 1029
0.404 (10.26) 5.5 (7/32) 5605 772 5506 5605 750 4330 1106 893 4000 0814 353 3356 5605 007 1030
* consisting of file holder with round file, flat file and filing gauge.

49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 036 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 036 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info