466729
22
Zoom out
Zoom in
Previous page
1/56
Next page
0DNLQJVDSZRRGFXWV
For medium sized or larger trees
make cuts at both sides of the trunk,
at same height as subsequent
felling cut.
Cut to no more than width of guide
bar.
This is especially important in soft
wood in summer - it helps prevent
sapwood splintering when the tree
falls.
% )HOOLQJFXW
Conventional and open-face technique:
Begin 1 to 2 inches higher than
center of felling notch
Cut horizontalIy towards the felling
notch
Leave approx.
1
/10 of diameter uncut.
This is the hinge
Do not cut through the hinge
you could lose control of the
direction of the fall
Drive wedges into the felling cut where
necessary to control the fall.
:DUQLQJ
If the tip of the bar contacts a wedge,
it may cause kickback. Wedges should
be of wood or plastic never steel,
which can damage the chain.
& +LQJH
Helps control the falling tree
Do not cut through the hinge -
you could lose control of the
direction of the fall
:DUQLQJ
In order to reduce the risk of personal
injury, never stand directly behind the
tree when it is about to fall, since part of
the trunk may split and come back
towards the operator (barber-chairing),
or the tree may jump backwards off the
stump. Always keep to the side of the
falling tree. When the tree starts to fall,
withdraw the bar, shut off the engine and
walk away on the preplanned escape
path. Watch out for falling limbs.
001BA044 L
Ä
001BA045 L
Ä
001BA043 L
Ä

22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 026 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 026 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stihl 026

Stihl 026 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info