52138

Stihl 017 Manual

41
Zoom out
Zoom in
Previous page
1/54
Next page
The carburetor does not have a high
speed adjusting screw (H screw) but is
designed to provide an optimum fuel-air
mixture under all operating conditions.
The maximum engine speed specified
for machines with a conventional
carburetor does not apply to this version.
No provision is made for adjustment of
maximum engine speed. On these
machines it is only possible to correct
the idling speed within narrow limits.
•
••
•
Check the air filter and clean it if
necessary.
Carefully screw the low speed screw (L)
down onto its seat.
Now open it one turn counterclockwise
(standard setting, L = 1)
•
••
•
Warm up the engine.
It is usually necessary to change the
setting of the idle speed screw (LA) after
every correction to the low speed screw
(L).
Turn screws only very slightly and
carefully - even minor changes have a
noticeable effect on the engine’s running
behavior.
Engine stops while idling:
’L’ screw must be one turn open.
Turn the idle speed screw (LA) clockwise
until chain begins to run -
then back off the screw one quarter
of a turn.
Chain runs when engine is idling
’L’ screw must be one turn open.
Turn the idle speed screw (LA)
counterclockwise until chain
stops running -
then turn screw another quarter turn in
the same direction.
Erratic idling behaviour,
poor acceleration
(even though ’L’ screw in one turn
open)
Idle setting is too lean.
Turn the low speed screw (L) counter-
clockwise until engine runs and
accelerates smoothly.
L
LA
143BA028 KN
Adjusting Carburetor
with two adjusting screws
Motor Management
Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components
(e.g. carburetion, ignition, timing and
valve or port timing) without the addition
of any major hardware.
LLA
017, 018 39
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 017 in the language / languages: English as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info