52087
36
Zoom out
Zoom in
Previous page
1/53
Next page
Top: Chain brake disengaged
Bottom: Stop switch in
position
2
125BA021 LA
2WKHUSRLQWVWRREVHUYHZKHQVWDUWLQJWKHHQJLQH
The choke lever is mechanically connected to the carbure-
tor’s choke valve. The choke valve is closed when the choke
lever is on I and open when the choke lever is moved away
from I.
When starting a cold engine only keep the choke slide in the
I position until the engine begins to fire. Even if you do not
hear the engine firing, always open the choke after pulling
the starter rope three or four times. If you leave the choke
slide in the I position, the combustion chamber will flood
and stall the engine.
If you have moved the choke slide away from I after the
engine has fired or after three or four pulls on the starter
rope and the engine still refuses to start, you can assume
that the combustion chamber is already flooded. In such a
case, remove and dry off the spark plug. With the spark plug
still removed and the stop switch on G, clear the combus-
tion chamber by cranking the engine several times on the
starter. When you now try to start, move the choke lever
away from I and set the throttle trigger to the start position.
The stop switch should again be moved away from G.
In very cold weather only open the choke partially after the
engine begins to fire – move choke lever to about the center
position. Allow engine to warm up for a brief period with the
throttle in the start position. Then move choke lever com-
pletely away from I and disengage the starting throttle
lock.
A new engine or one which has been run until the fuel tank
is dry will not start first time after fueling because the fuel
pump only begins to deliver sufficient fuel of the carburetor
after the engine has been turned over a few times on the
starter.
8. Disengage the chain brake before starting cutting work
by pulling the hand guard  back toward the handle-
bar .
9. The engine is shut down by sliding the stop switch 
to G.
1
125BA020 LA

36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stihl 009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stihl 009 in the language / languages: English as an attachment in your email.

The manual is 3,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info