608471
69
Zoom out
Zoom in
Previous page
1/112
Next page
14
Operation
Hours
Completed (Date or Hours)
1.7
Brake regulation and check 
3)
25
1.8
Drive regulation and check 
3)
25
1.9
Cutting means engage and brake check 
3)
25
1.10
Complete bolt and screw check 25
1.11
General lubrication
4)
25
2. ENGINE
1)
2.1
Replacement of the engine oil
2.2
Air lter cleaning and check
2.3
Air lter replacement
2.4
Fuel lter check
2.5
Fuel lter replacement
2.6
Spark plug points cleaning and check
2.7
Replace spark plug
1)
See the engine manual for the full list and frequency.
2)
At the rst signs of any malfunction, contact your Dealer.
3)
The operation must be carried out by your Dealer or a specialized Service Centre.
4)
General lubrication of all joints should also be carried out whenever the machine is to be left un-
used for a long period.
6.2.1 Engine (Fig. 6.1)
IMPORTANT Follow all the instructions in the
engine manual.
To empty the oil from the engine, hold the ex-
tension tube (1) rmly in place and unscrew the 
drain plug (2).
When retting the plug (2) make sure the seal 
(3) is positioned correctly and tighten it as far as 
possible, holding the extension tube (1) rmly in 
place.
6.2.2 Rear axle
This is a sealed single unit that does not require 
maintenance. It is permanently lubricated and 
its lubricant does not need changing or topping
up.
6.2.3 Battery (Fig. 6.2)
To ensure long life to the battery it is essential to 
keep it carefully maintained. 
The machine battery must always be charged:
–  before using the machine for the rst time 
after purchase;
–  before leaving the machine disused for a long 
period;
–  before starting up the machine after a pro-
longed period of inactivity.
Carefully read and observe the battery recharg-
ing instructions in the booklet provided with the 
battery. Failure in following the procedure or in 
charging the battery could permanently damage 
the battery elements.
A at battery must be recharged as soon as 
possible.
IMPORTANT Recharging must be done us-
ing a battery charger at constant voltage. Other
recharging systems can irreversibly damage the
battery.
The machine comes with a connector (1) for re-
charging; this is connected to the corresponding 
connector for the special  maintenance battery-
charger supplied (if included) or available on 
request  (see  8.2).
69


Need help? Post your question in this forum.

Forumrules
1

Forum

stiga-tornado-2198-h

Reset search

  • How do you set it for mulching mode. I have no manual. It leaves a row of grass between blades at moment. Thanks. Submitted on 23-3-2018 at 03:58

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga TORNADO 2198 H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga TORNADO 2198 H in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info