608703
273
Zoom out
Zoom in
Previous page
1/858
Next page
27
EN
ENGLISH
(Translation of the Original Instructions)
6. Diculty in engine start-up or
engine runs irregularly.
Carburetion problems. Clean or replace the air lter.
7. Drop in engine performance
during cutting.
Forward speed too high in relation to
the cutting height.
Reduce the forward speed and/or
raise the cutting height.
8. The battery indicator does not
go o after a few minutes of
operation.
Insucient recharge. Contact an authorised assistance
centre.
9. The oil indicator comes on
during operation.
Engine lubrication problems.
- Turn the machine o immediately.
- Top up the oil level (if the problem
persists, contact an authorised
assistance centre).
10. The engine stops for no appa-
rent reason.
- Fuel tank empty.
- Try to restart the engine.
Fill the fuel tank (if the problem
persists, contact an authorised
assistance centre).
11. Uneven cutting. Check the tyre pressure
The cutting mean sharpness level
is low.
Contact an authorised assistance
centre.
Forward speed too high in relation to
the height of the grass being cut.
Reduce the forward speed and/or
raise the cutting height.
The cutting means assembly is full
of grass.
- Wait for the grass to dry.
- Clean the cutting means assembly.
12. Abnormal vibration during use. - Unbalanced cutting means.
- Loose cutting means.
- Loose components.
- Possible damage.
Contact an authorised assistance
centre for inspection, replacement or
repair operations.
13. With the engine running,
activation of the traction pedal
does not move the machine.
“Disengage transmission” lever in
the disengaged position.
Engage the transmission.
If problems persist after the operations above have been performed, contact your dealer.
Warning! Never attempt to carry out complicated repairs without the necessary tools or
technical ability. Any poorly performed interventions will automatically nullify the warranty

273


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga Pro 740 IOX - P 901 PH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Pro 740 IOX - P 901 PH in the language / languages: All languages as an attachment in your email.

The manual is 160,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info