608703

Stiga Pro 740 IOX - P 901 PH Manual

263
Zoom out
Zoom in
Previous page
1/858
Next page
17
EN
ENGLISH
(Translation of the Original Instructions)
7.3 BONNET (10)
For instructions on how to get to the en-
gine and the key switch, please refer to
section 6.1.
7.4 ENGINE CASING (30)
To remove the engine casing, you must rst open
the bonnet.
7.4.1 Engine casing removal
1. Undo the 8 screws (30:A).
2. Take the cap o the petrol tank.
3. Remove the engine casing (30:B).
4. Replace the cap on the petrol tank.
5. Perform the necessary interventions.
7.4.2 Engine casing installation.
1. Take the cap o the petrol tank again.
2. Reposition the engine casing (30:B).
3. Replace the cap on the petrol tank.
4. Screw the 8 screws back in.
7.5 CHECKING THE ENGINE OIL LEVEL (25)
The machine is delivered complete with engine oil.
Before starting the machine check the
level of the engine oil.
To check / top up the engine oil, see
99.5.1, 99.5.2.
7.6 CHECKING THE TRANSMISSION FLUID
LEVEL

see 99.6.1.
7.7 SAFETY CHECKS
When trying out the machine, check that the
results of the safety checks correspond with the
indications provided in the following tables.
Always carry out the safety checks be-
fore use.
If any of the results fails to match the
indications provided in the following
table, do not use the machine! Take it
to a service centre to be checked and
repaired if necessary.
7.7.1 General safety check
 Result
Fuel lines and
connections.
No leaks.
Electrical cables. All insulation intact.
No mechanical damage.
Exhaust system. No leaks at connections.
All screws tightened.
Oil lines No leaks. No damage.
Activate the
machine forwards/
backwards and
release the traction
pedal.
The machine will stop.
Test driving No abnormal vibrations.
No abnormal sound.
7.7.2 Electrical safety check
Status Action Result
The parking
brake pedal is not
pressed.
Try to start
the machine.
The engine
does not
start.
Engine switched
on
The driver
gets o the
seat
The engine
is switched
o.
7.8 START-UP / OPERATION
When using the machine, the bonnet
must be closed and fastened shut.
Always use full throttle when using the
machine.
1. Open the fuel cock (24:B).
2. Insert the key in the main power switch
(12:A).
3. Engage the transmission (19) - (lever out).
4. Insert the key in the switch (14:C).
5. Do not keep your foot on the traction pedal
(13:C).
Cold start
1. Activate the parking brake (13:A).
2. Turn the throttle to full on (14:A).
3. Pull the choke out completely (14:B).
4. Turn the switch key to the “ON” position and
press the START button (14:P).
Before starting work with the machine,
wait a few minutes for the oil to warm
up.
… 263 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga Pro 740 IOX - P 901 PH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Pro 740 IOX - P 901 PH in the language / languages: All languages as an attachment in your email.

The manual is 160,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info