608691
8
Zoom out
Zoom in
Previous page
1/15
Next page
53
ENGLISH
EN
2. Lever in backward position -
differential inhibitor engaged. Works for
both forward and reverse drive.
The differential inhibitor is of greatest use
when the rear wheels are unevenly loaded. For
example when turning sharp corners where the
inner rear wheel bears a lesser load.
When driving during the winter on slippery
surfaces, the drive capacity is improved if snow
chains are not used.
When the differential inhibitor is engaged, the
steering is heavy. Avoid turning the steering
wheel!
13. HOUR COUNTER
Indicates the number of working hours. Only
works when the engine is running.
14. CRUISE CONTROL
(Royal - Pro16 - Pro20)
A switch for activating the cruise control. The
cruise control allows the drive pedal (5) to be
locked in the desired position.
1. Press down the drive pedal until the
desired speed is obtained. Then press the
front part of the switch to activate the
cruise control. The symbol will light up.
2. Disengage the cruise control by braking
or pressing the rear part of the switch.
15. CUTTING HEIGHT ADJUSTMENT
(Royal - Pro16 - Pro20)
The machine is equipped with a control for using
the cutting deck with electrical cutting height
adjustment (available as an accessory).
The switch is used to adjust the cutting
height in continuously variable positions.
The contact used for connecting the
cutting deck is mounted on the right side, in front
of the front wheel (fig. 2).
16. REAR RAKE (Pro20)
The machine is fitted with a control for electrical
adjustment of a rear rake (available as an
accessory).
The switch is used to raise and lower the
rear rake.
Cables for connecting the rear rake are found at the
rear of the machine, to the left of the upper side of
the bumper. (Pro16 is prepared for a rear rake,
cables routed).
17. SAND SPREADER (Pro20)
The machine has been designed for electrical
adjustment of a sand spreader (available as an
accessory).
The switch is used to start and stop the
spreader.
The contact for connecting the sand spreader is
found at the rear of the machine, to the left of the
upper side of the bumper. (Pro16 is prepared for a
sand spreader, cables routed).
18. DISENGAGING LEVER
A lever for disengaging the variable transmission.
Enables the machine to be moved by hand without
the help of the engine. Two positions:
1. Lever moved back –
transmission engaged for normal
operation.
2. Lever moved forward –
transmission disengaged. The
machine can be moved by hand.
The machine may not be towed over long distances
or at high speeds. The transmission could be
damaged.
19. FUEL GAUGE/FUEL CAP
Fuel cap with built-in fuel gauge that
indicates how much fuel there is in the
fuel tank (applies to Royal-Pro16-Pro20 -
Excellent).
Comfort and President have a fuel cap without a
fuel gauge. The fuel tank holds approx. 11.5 litres.
AREAS OF USE
The machine may only be used for the following
tasks using the genuine STIGA accessories stated.
1. Mowing
Using cutting deck 92M, 107M, 107 M HD,
121M, 125 Combi Pro or flail mower.
2. Sweeping
Using brush unit or collector brush unit . Use of
dust guard is recommended with the first
option.
3. Snow clearance
Using snow blade or snow thrower . Snow
chains and frame weights are recommended.
4. Grass clipping and leaf collection
Using towed collector.
5. Grass and leaf transport
Using dump cart.
6. Sand spreading
Using sand spreader. Can also be used for
spreading salt. Snow chains and frame weights
recommended.
12V
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga Park EXCELLENT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Park EXCELLENT in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info