608718
110
Zoom out
Zoom in
Previous page
1/408
Next page
•  Cold starting
NOTE
A “cold” start of the engine
means starting it after at least 5 minutes from when
it was switched o or after refuelling.
To start the engine (Fig. 8):
1.  Press the  lock  lever  (3),  activate  the  throttle 
(2) and holding them in this position, move the 
switch (1) to the «START» position, then re-
lease the lever (3) and the throttle (2).
2. Operate  the  starter,  turning  lever  (5)  to 
«CHOKE».
STARTING THE ENGINE
WARNING!
The engine must be star-
ted in an area at least 3 metres from where
you relled the fuel tank.
Before starting the engine:
–  Place the machine rmly on the ground.
–  Remove the guard from the blade (if used).
–  Make sure the blade (if used) is not touching the 
ground or any other object.
IMPORTANT
Periodically clean the petrol
and fuel mixture containers to remove any even-
tual deposits.
REFUELLING
DANGER!
Never smoke whilst refuel-
ling and avoid inhaling the petrol fumes.
WARNING!
Carefully open the tank
top as pressure could have formed inside.
Before refuelling:
–  Shake the fuel mixture container well.
–  Place the machine on a at stable surface, with 
the fuel tank cap facing upwards.
–  Clean  the  fuel  tank cap  and  the  surrounding 
area  to  avoid  any  dirt  from  entering  the  tank 
during relling.
–  Carefully  open  the  fuel  tank  cap  to  allow  the 
pressure  inside  to  decrease  gradually.  Use  a 
funnel to rell and  avoid  lling  the  tank  to the 
brim.
WARNING!
Always close the fuel tank
cap rmly.
WARNING!
Immediately clean all tra -
ces of fuel which may have dripped on the
ma chine or the ground and do not start the
engine until the petrol fumes have dissipated.
Keep the petrol and fuel mixture in ho mo
log ated fuel containers, in safe place, away
from any ames or heat sources.
Never leave the containers within the reach
of children.
Never smoke whilst preparing the mixture
and avoid inhaling the petrol fumes.
The chart indicates the amount of petrol and oil to 
use to prepare the fuel mixture according to the 
type of oil used.
To prepare the fuel mixture:
–  Place about half the amount of petrol in a ho mo-
logated tank.
–  Add all the oil, according to the chart.
–  Add the rest of the petrol.
–  Close the top and shake well.
IMPORTANT
The fuel mixture tends to
age. Do not prepare excessive amounts of the fuel
mixture to avoid deposits from forming.
IMPORTANT
Keep the petrol and fuel mix
ture containers separate and easily identiable to
avoid the mistake of using one in place of the
other.
108 PREPARING TO WORK / HOW TO START - USE - STOP THE ENGINE
EN
6.  HOW TO START - USE - STOP THE ENGINE
Petrol  Synthetic oil 2-stroke
liters  liters  cm
3
1 0.02 20
2 0.04 40
3 0.06 60
5 0.10 100
10 0.20 200
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga B 33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga B 33 in the language / languages: All languages as an attachment in your email.

The manual is 7,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info