608716

Stiga B 28 D Manual

109
Zoom out
Zoom in
Previous page
1/408
Next page
When mounting,
–   Ensure that the grooves in the inner ring-nut (8) 
match up perfectly with the angle transmission 
(3).
–   Fit the blade (1) and outer ring-nut (7).
–   Ret the washer (6) and the nut (5), fully tighte-
ning it in an anticlockwise direction.
–   Reposition the  split  pin  (4) and refold the  two 
ends.
–   Remove the wrench (2) to restore blade rotation.
• Cutting line head (Fig. 7)
NOTE
The cutting line head has a
left-hand thread and so must be unscrewed in a
clockwise direction and screwed up anticlockwise.
–   Insert the wrench supplied (2) into the specic 
hole in the angle transmission (3) and rotate the 
cutting line  head (1) by hand until  the wrench 
enters the inner hole, blocking rotation.
–   Remove the cutting line head (1) unscrewing it 
in a clockwise direction.
When mounting,
–   Ensure that the grooves  in  the  inner  ring-nut 
(4) match  up perfectly with the angle  tranmis-
sion (3).
–   Fit the cutting line head (1) screwing it up in an 
anticlockwise direction.
–   Remove the wrench (2) to restore shaft rotation.
• Petrol characteristics
Only use unleaded petrol with a fuel grade of at 
least 90 N.O.
IMPORTANT
Unleaded petrol tends to cre-
ate deposits in the container if preserved for more
than 2 months. Always use fresh petrol!
•  Oil characteristics
Only use  top  quality  synthetic  oil  specically  for 
two-stroke engines.
Your dealer can provide you with oils which have 
been specically developed for this type of en gine, 
and which are capable of guaranteeing a high level 
of protection.
The use of these oils makes it possible to prepare 
a 2% mixture, consisting in 1 part oil to 50 parts 
petrol.
•   Preparation and preservation of the fuel 
mixture
DANGER!
Petrol and the fuel mixture
are highly inammable!
CHECKING THE MACHINE
Before starting work please:
–   check that all the screws on the machine and the 
cutting device are tightly fastened;
–   check that the cutting device is undamaged and 
that the 3-point metal blades (if tted) are prop-
erly sharpened;
–   check that the air lter is clean;
–   check that the protection devices are well fas-
tened and working eciently;
–   check the handgrips are well fastened.
PREPARING THE FUEL
This  machine  is  tted  with  a  two-stroke  engine 
which requires a mixture of petrol and lubricating 
oil.
IMPORTANT
Using petrol alone will da-
mage the motor and will cause for invalidation of
the warranty.
IMPORTANT
Only use quality fuels and
oils to maintain high performance and guarantee
the duration of the mechanical parts over time.
MACHINE ASSEMBLY / PREPARING TO WORK 107
EN
  5.  PREPARING TO WORK
… 109 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga B 28 D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga B 28 D in the language / languages: All languages as an attachment in your email.

The manual is 7,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info